The Wacker Neuson is a genuine OEM Adjusting Washer designed for a broad range of Wacker Neuson equipment, including DPU and DPS series reversible and single-direction vibratory plate compactors, PT2H and PT3H centrifugal trash pumps, DS70 vibratory rammers, HSH350 hydronic surface heaters, and E1100 ground heaters. As a factory-sourced component, part is manufactured to the exact tolerances required by Wacker Neuson engineers, ensuring correct fit and function across every compatible model. This genuine OEM part carries the full confidence of Wacker Neuson's supply chain, so you can install it knowing it meets the same specification as the original. Confirm your model number before ordering — fitment spans dozens of DPU, DPS, PT, DS, and HSH series units.
Key Features
- OEM-Spec Thickness Tolerance — Sourced directly from Wacker Neuson, this adjusting washer is produced to the exact dimensional tolerances the original design requires, ensuring proper bearing pre-load and shaft alignment.
- Drop-In Installation — Matches the original washer's outer diameter, inner diameter, and thickness, so it seats correctly in the same position without any modification to surrounding components.
- Broad Cross-Family Fitment — A single part number covering DPU/DPS vibratory plate compactors, PT2H and PT3H trash pumps, DS70 rammers, HSH350 hydronic surface heaters, and E1100 ground heaters — always verify your model and machine number before ordering.
- Maintains Correct Running Clearance — An adjusting washer at the correct specification keeps rotating or reciprocating assemblies within their designed clearance range, preventing premature wear on adjacent bearings, shafts, or housings.
- Genuine Wacker Neuson Part — Part number 5000151405 is an authorized OEM component, not a generic substitute, giving you confidence that material grade and dimensions align with what left the factory.
An adjusting washer is a precision-thickness shim used to set or restore the correct axial clearance between rotating components such as shafts, gears, bearings, or impellers. By controlling how tightly or loosely an assembly is stacked, the washer ensures that moving parts turn freely without unwanted end-play that causes accelerated wear. When an adjusting washer is worn, crushed, or missing, the affected assembly can develop excessive play or binding, leading to premature bearing failure, vibration anomalies, or leakage at seals — all of which can take a machine out of service if left unaddressed.
Part Details
| Part Number | 5000151405 |
|---|---|
| Old Part Number | 0151405 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Adjusting Washer |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPU6275Heh | DPU6275Heh | 5100058467 |
| DPU5260Heh | DPU5260Heh | 5100060825 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPU5260He | DPU5260He | 5100076465 |
| DPU5260Hehp | DPU5260Hehp | 5100076466 |
| DPU5260Hehcb+ | DPU5260Hehcb+ | 5100076467 |
| DPU5260Hehcpb+ | DPU5260Hehcpb+ | 5100076468 |
| DPU6260Hehp | DPU6260Hehp | 5100076469 |
| DPU6260Hehcb+ | DPU6260Hehcb+ | 5100076470 |
| Vibration Plate DPU6275He | DPU6275He | 5100076471 |
| Vibration Plate DPU6275Hecb+ | DPU6275Hecb+ | 5100076472 |
| DPU6275Hehcb+ | DPU6275Hehcb+ | 5100076473 |
| Vibration Plate DPU5260Hep | DPU5260Hep | 5100077269 |
| DPU5275Heh | DPU5275Heh | 5100077270 |
| DPU5260H | DPU5260H | 5100077271 |
| Vibration Plate DPU5260Hehcpb+ LOXAM | DPU5260Hehcb+ LOXAM | 5100077272 |
| DPU5275Hehcb+ | DPU5275Hehcb+ | 5100077273 |
| Vibration Plate DPU5260Hp | DPU5260Hp | 5100077274 |
| DPU5260Hecpb+ | DPU5260Hecpb+ | 5100077275 |
| Vibration Plate DPU5275He | DPU5275He | 5100077276 |
| DPU5247Heh | DPU5247Heh | 5100077277 |
| Vibration Plate DPU5275H | DPU5275H | 5100077278 |
| DPU6260Heh | DPU6260Heh | 5100077280 |
| DPU6260Hehcpb+ | DPU6260Hehcpb+ | 5100077282 |
| Vibration Plate DPU6275H | DPU6275H | 5100077283 |
| DPU6260He | DPU6260He | 5100077284 |
| Vibration Plate DPU6260Hep | DPU6260Hep | 5100077285 |
| DPU6260Hecb+ | DPU6260Hecb+ | 5100077286 |
| Vibration Plate DPU6260Hecpb+ | DPU6260Hecpb+ | 5100077287 |
| Vibration Plate DPU6260H | DPU6260H | 5100077288 |
| Vibration Plate DPU6260Hp | DPU6260Hp | 5100077290 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
