The Wacker Neuson is a genuine OEM Push-In Plug designed for a wide range of Wacker Neuson equipment, including HSH350 hydronic surface heaters, PT2H and PT3H centrifugal trash pumps, DPU reversible vibratory plates, and DPS single-direction vibratory plates. As a factory-sourced component, the is manufactured to the exact dimensions and material specifications required for a secure, rattle-free fit in every application it covers. This plug spans multiple machine families — from compaction equipment to pumps and surface heaters — making it a practical stocking part for fleets running mixed Wacker Neuson equipment. Confirm your model number against the fitment list before ordering to ensure compatibility.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to Wacker Neuson's exact material and dimensional tolerances, ensuring the plug seats flush and holds a positive seal against dust, moisture, and debris ingress.
- Press-In Installation — Designed to snap directly into the port opening without fasteners or adhesives, simplifying installation during service or inspection.
- Broad Cross-Family Fitment — A single part number covering HSH350 hydronic surface heaters, PT2H and PT3H trash pumps, DPU 2440H through DPU 3750Hts reversible vibratory plates, and DPS 1850H single-direction vibratory plates.
- Port Protection Across Applications — Keeps open ports on compaction, pump, and heating equipment sealed during storage, transport, or servicing, preventing contamination that can damage internal components.
- Direct OEM Sourcing — Supplied as a genuine Wacker Neuson part, so fitment data, part number cross-references, and material specs align exactly with the original equipment documentation.
A push-in plug is a simple but essential sealing component used to close off open ports, access holes, or unused fittings on equipment housings and fluid systems. When seated correctly, it prevents dirt, water, and debris from entering internal passages during service intervals, transport, or periods of storage. A missing or improperly fitted plug can allow contamination to reach hydraulic circuits, fuel systems, or mechanical assemblies, leading to accelerated wear or component failure. The Wacker Neuson 5000151473 is designed to fit precisely into its designated port, providing a secure mechanical closure that stays in place under the vibration and operating conditions typical of compaction, pump, and heating equipment.
Part Details
| Part Number | 5000151473 |
|---|---|
| Old Part Number | 0151473 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Push-In Plug |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPU2540H VIBROPLATE | DPU 2540H | 5000008755 |
| vibration plate DPU 2550 H | DPU 2550H | 5000008756 |
| vibration plate DPU 2560H | DPU 2560H | 5000008757 |
| DPU3050H VIBROPLATE | DPU 3050H | 5000008759 |
| vibration plate DPU 3060 H | DPU 3060H | 5000008760 |
| Vibratory Plate | DPU 3070H | 5000008908 |
| DPU 2560H-TS-VIBROPLATE | DPU 2560H-TS | 5000610005 |
| DPU 3060H-TS-VIBROPLATE | DPU 3060H-TS | 5000610006 |
| vibration plate DPS 1850H | DPS1850H Basic | 5000008924 |
| vibration plate DPS 1850H | DPS1850H Asphalt | 5000008925 |
| vibration plate DPS 1850H | DPS1850H Vario | 5000008926 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
