The Wacker Neuson is a genuine OEM Hydraulic Fitting Elbow 90 designed for the RT and RTx series remote-controlled vibratory trench rollers, including RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTL82-SC3, RTLx-SC3, and RTKx-SC3 models. As a direct factory replacement, this fitting is sourced from Wacker Neuson and built to the same specification as the original component installed at the factory. Fitment spans a broad range of RT-family configurations across standard, EU, and Compatec variants, making a widely applicable hydraulic component across the trench roller lineup. Confirm your machine number against the fitment list before ordering to ensure correct application.
Key Features
- Genuine OEM Hydraulic Integrity — Factory-sourced fitting maintains correct flow path geometry and thread specification for the RT-series hydraulic circuit, preventing pressure loss or leakage at the elbow junction.
- 90-Degree Elbow Configuration — The angled elbow design routes hydraulic lines through tight spaces within the trench roller frame, allowing hoses to connect without sharp bends that could restrict flow or cause premature hose wear.
- Broad RT-Family Compatibility — Fits RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTL82-SC3, RTLx-SC3, RTK82-SC3, and RTKx-SC3 trench rollers across multiple machine configurations and serial number ranges.
- Hydraulic System Performance — A correctly sealed and properly torqued hydraulic elbow fitting keeps system pressure stable, ensuring the trench roller's drive and vibration circuits respond consistently in demanding trench compaction conditions.
- Leak Prevention at the Fitting Point — A worn, cracked, or cross-threaded elbow fitting is a common source of hydraulic fluid loss; replacing with the OEM 5000151768 restores a clean, leak-free connection at the routing junction.
A hydraulic elbow fitting directs pressurized fluid from one line to another at a 90-degree angle, allowing the hydraulic circuit to change direction within the confined frame of a remote-controlled trench roller. This type of fitting must maintain a leak-free seal under continuous hydraulic pressure — any failure at the fitting point causes fluid loss, pressure drop, and loss of drive or vibratory function. When this fitting cracks, strips, or develops a leak, the machine's hydraulic performance degrades quickly, making prompt replacement essential to keep the roller operating at full compaction output.
Part Details
| Part Number | 5000151768 |
|---|---|
| Old Part Number | 0151768 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Hydraulic Fitting Elbow 90 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Vibratory Trench Roller | RT560 | 5000009001, 5000009000 |
| Vibratory Trench Roller | RT820 | 5000009003, 5000009002 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
