The Wacker Neuson is a genuine OEM Pan Screw 4X6 designed for a wide range of Wacker Neuson equipment including BS-series vibratory rammers, BFS floor saws, WP and BPU vibratory plate compactors, CT walk-behind concrete trowels, RD tandem rollers, and PT trash pumps. As a genuine OEM component, the is manufactured to the same specification as the original hardware installed at the factory, ensuring correct thread engagement, head profile, and material grade across every application it serves. This screw appears in multiple assemblies throughout these machine families, making it a smart stocking item for dealers, rental fleets, and service shops that maintain mixed Wacker Neuson equipment. Confirm your model number against the fitment list before ordering to ensure the is the correct screw for your specific configuration.
Key Features
- Genuine OEM Thread Accuracy — Manufactured to the exact thread pitch, diameter, and head geometry specified for each assembly, ensuring full engagement without cross-threading or fastener failure.
- Direct Drop-In Hardware — Installs without modification into the existing threaded bosses or clearance holes across all listed machine families, seating flush to the designed torque specification.
- Broad Cross-Family Fitment — Compatible with BS50-4As, BS60-4As, BS70-4As, BS62, BS65, BS68, BS72 rammers; BFS614AB and BFS735 floor saws; WP1540A, WP1550A, WP1550Aw plate compactors; BPU2540A; CT24-4A trowels; RD11A and RD11AEC tandem rollers; PT2A trash pumps; and PG2A and PG3A generators.
- Correct Material Grade for the Application — OEM-specified material and finish prevent galvanic corrosion and fastener seizing in the vibration-intensive environments typical of compaction and cutting equipment.
- Prevents Assembly Loosening Under Vibration — A correctly spec'd fastener in high-vibration equipment maintains clamping force and prevents panel, guard, or component separation during operation — a worn or incorrect screw can lead to loose assemblies and accelerated wear on surrounding components.
A pan head screw is a threaded fastener with a low-profile, slightly rounded head and a flat bearing surface that distributes clamping load across a wider area than a countersunk fastener. In construction equipment, these screws are used to secure covers, guards, panels, brackets, and internal components where a flush or recessed head profile is required. Because Wacker Neuson equipment operates under continuous vibration, correct fastener specification — including thread pitch, shank diameter, and head size — is essential to maintaining joint integrity over time. Using an incorrect or worn screw risks loosening, stripped threads, and potential damage to the components being secured.
Part Details
| Part Number | 5000151824 |
|---|---|
| Old Part Number | 0151824 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Pan Screw 4X6 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS735 | BFS735 | 5100029228, 5100054573 |
| PG2A | PG2A | 5000009054 |
| PG3A | PG3A | 5000009055 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11AEC | 5000007695 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11A | 5000007693 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| BFS735 | BFS735 CN | 5100042681 |
| BPU2540A | BPU 2540A | 5000008758 |
| WP1540Aw | WP1540Aw US | 5100018327 |
| WP1550Aw | WP1550Aw US | 5100018324 |
| WP1540A | WP1540A US | 5100018328 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Floor Saws | BFS 614AB | 5000009527 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| WP1550A | WP1550A US | 5100018325 |
| WP1550A | WP1550A | 5100062423 |
| WP1550Aw | WP1550Aw | 5100062424, 5100066158 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Gasoline Powered Floor Saw | BFS 735A | 5100001816 |
| Floor saw BFS735 | BFS 735 | 5100009932 |
| PT2A | PT2A | 5100042215 |
| PT2A(I) | PT2A(I) | 5100042613 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.