The Wacker Neuson is a genuine OEM Grease Cap designed for the G25, G50, G70, G120, G125, and G160 series skid-mounted and mobile generators. As a factory-sourced component, matches the original specification exactly, ensuring a correct, secure fit without modification. This part covers an extensive range of configurations including standard, cold weather, extended run, custom, and 600V variants across multiple Tier levels. Whether you are servicing a single-axle trailer-mounted unit or a heavy-duty skid base generator, this Grease Cap is the correct replacement to keep lubrication points properly protected.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to the original material and dimensional spec, this Grease Cap maintains a tight, contamination-free seal on grease fittings — critical for preventing moisture and debris ingress on outdoor generator applications.
- Direct-Fit Replacement — Threads or presses directly onto the original grease fitting without adapters, matching the retention and torque characteristics of the factory part.
- Broad Generator Series Coverage — Confirmed fitment across G25, G50, G70, G120, G125, and G160 generator families, spanning standard, cold weather, extended run, custom, and 600V configurations.
- Protects Lubrication Points Between Service Intervals — A properly seated grease cap keeps fittings clean and primed, so lubricant is fully delivered to bearings and moving components at the next service — a missing or cracked cap can allow grease contamination that accelerates wear.
- Verified OEM Part Number — Sourced directly through Wacker Neuson's parts network; part number 5000152246 is the authoritative reference for this application across all listed models.
A grease cap is a small but essential protective cover that fits over a grease zerk or lubrication fitting on rotating components such as generator alternator bearings or shaft assemblies. Its job is to keep dirt, moisture, and debris out of the fitting between grease intervals, ensuring that when grease is applied it reaches the bearing surface clean and uncontaminated. A missing, cracked, or improperly seated grease cap allows grit to pack into the fitting, blocking lubrication flow and accelerating bearing wear — which can eventually lead to premature component failure on equipment that is often run continuously under load.
Part Details
| Part Number | 5000152246 |
|---|---|
| Old Part Number | 0152246 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grease Cap |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Skid-mounted Mobile Generator, Custom | G70 | 5000620352, 5000620350, 5000620351, 5000620647, 5000620711, 5000620646, 5200001318, 5200003220, 5200006879, 5200003975, 5200003973, 5200003974, 5200014464, 5200004151, 5200014463, 5200014465, 5200008344, 5200008342, 5200008343, 5200008339, 5200008719, 5200008340, 5100025262, 5100025838 |
| Skid-mounted Mobile Generator | G50 | 5000009467, 5000009366, 5000620001, 5200001062, 5200001063, 5200006878, 5200001317, 5200001060, 5200001061, 5200014322, 5200014319, 5200014320, 5200014323, 5200017829, 5200022589, 5100042434, 5200017830, 5100042430, 5100042435, 5000620710, 5100045494, 5000620964, 5000620965, 5000620966, 5100042431, 5100042433, 5100045085, 5100045493, 5100042432, 5100025812, 5100026954, 5100029210, 5100026955, 5100026956 |
| Mobile Generator (Cold Weather ) | G120 | 5000620291, 5000620290, 5000620292 |
| Skid-mounted Mobile Generator | G160 | 5000009306, 5000620069, 5000620070 |
| G25 GENERATOR, EXTENDED RUN TANK, SKID | G25 | 5000620709, 5000620706, 5100042510 |
| Mobile Generator (custom) | G125 | 5000620067, 5000620068, 5000009261 |
| MGT1S Mobile Generator Trailer, Surge, Pintle Hitch | MGT1S | 5000009299 |
| Mobile Generator Dual Axle Tra iler, Electric Brake | MGT3E | 5000008241 |
| MGT2SD Trailer, Surge, Dual Axle, 3500LB Each | MGT2SD | 5000009303, 5200001325 |
| Mobile Generator Dual Axle Tra iler, Surge Brakes | MGT3S | 5000008240 |
| MGT1S Trailer, Surge, Pintle Hitch | MGT 1S | 5200001324 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
