The Wacker Neuson is a genuine OEM Wire Grommet designed for the G-series portable generator lineup, including G25, G50, G70, G120, G125, G150, G160, G180, G230, and G240 skid-mounted and mobile generator models. As a factory-sourced component, this Wire Grommet meets the exact material and dimensional standards specified for these units, ensuring a proper fit without modification. It also crosses into select HI-series indirect-fired air heater applications and E1250-series hydronic heater units that share the same electrical architecture. Stock this part with confidence — part number is the correct OEM reference for the applications listed.
Key Features
- Genuine OEM Material Grade — Manufactured to Wacker Neuson's original compound specification for the elastomer used in wire pass-through grommets, maintaining the correct flexibility and dielectric properties over time.
- Direct Panel Fit — Sized to seat flush in the factory-punched wire entry aperture, providing a snug, rattle-free installation without trimming or shimming.
- Broad G-Series Coverage — A single part number covers G25 through G240 skid-mounted and mobile generator configurations across standard, cold weather, extended run, and custom build variants.
- Wire and Harness Protection — Correctly installed, this grommet shields wiring insulation from abrasion against sharp panel edges, preventing chafing that can lead to shorts or harness failures.
- Electrical Safety Application — On generator and heater equipment, maintaining intact wire routing protection is a genuine safety consideration; a cracked or missing grommet exposes live conductors to metal edges and moisture ingress.
A wire grommet is a small but critical protective insert that lines the edge of a hole where wiring or a harness passes through a metal panel or enclosure wall. Its primary job is to prevent the sharp stamped edge of the panel from cutting into the wire's insulation as the machine vibrates during operation. On generator equipment like the Wacker Neuson G-series, wiring runs through multiple panel penetrations, and a deteriorated or missing grommet can allow insulation wear that leads to short circuits, ground faults, or intermittent electrical faults that are difficult to diagnose. Replacing a worn grommet promptly is a low-cost step that protects the broader wiring harness from progressive damage.
Part Details
| Part Number | 5000152259 |
|---|---|
| Old Part Number | 0152259 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Wire Grommet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Skid-mounted Mobile Generator, Custom | G70 | 5000620352, 5000620350, 5000620351, 5000620647, 5000620711, 5000620646, 5200003220, 5200003975, 5200003973, 5200003974, 5200014464, 5200004151, 5200014463, 5200014465, 5200008344, 5200008342, 5200008339, 5200008719, 5200008340, 5100025262, 5100025838 |
| Skid-mounted Mobile Generator | G50 | 5000009467, 5000009366, 5000620001, 5200001062, 5200001063, 5200006878, 5200001317, 5200001060, 5200001061, 5200014322, 5200014319, 5200014320, 5200014323, 5200017829, 5200022589, 5100042434, 5200017830, 5100042430, 5100042435, 5000620710, 5100045494, 5000620964, 5000620965, 5000620966, 5100042431, 5100042433, 5100045085, 5100045493, 5100042432, 5100025812, 5100026954, 5100029210, 5100026955, 5100026956 |
| Mobile Generator (Cold Weather ) | G120 | 5000620291, 5000620290, 5000620292 |
| Skid-mounted Mobile Generator | G160 | 5000009306, 5000620069, 5000620070 |
| G25 GENERATOR, EXTENDED RUN TANK, SKID | G25 | 5000620709, 5000620706, 5100042510 |
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5000620656, 5000620306, 5000620655, 5200003160, 5000620889, 5000620307, 5200007860, 5000620308, 5000620887, 5000620888, 5200014784, 5200010135, 5200010136, 5200010137, 5100026980, 5100026981, 5100026982, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5000620303, 5000620658, 5000620659, 5200003161, 5000620886, 5000620884, 5200007861, 5000620304, 5000620885, 5000620305, 5200010140, 5200014470, 5200010138, 5200010139, 5200014471, 5100015615, 5200014469, 5100045089, 5100045575, 5100045576, 5100045590, 5100045591, 5100045592, 5100049844, 5100049845, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5000620662, 5000620300, 5000620661, 5200003162, 5000620301, 5000620302, 5100025834 |
| E1250S | E1250S | 5200012355, 5200012354 |
| G230 Generator, Custom T4i | G230 | 5000620883, 5000620881, 5000620882, 5200007862, 5200010141, 5200010142, 5200010143, 5100015614, 5100045190, 5100045596, 5100045597, 5100049846, 5100049847 |
| Mobile Generator (custom) | G125 | 5000620067, 5000620068, 5000009261 |
| E12540B | E1250B | 5200012353, 5200007613 |
| HI750 DGM HEATER-INDIRECT | HI750GM | 5000620859 |
| G150 Generator,Hertz,T4 Final | G150 Generator,Hertz,T4 Final | 5100015616 |
| E 1250P Hydronic Heater, Premium, Diesel | E1250P | 5200012357, 5200012356 |
| Mobile Generator Dual Axle Tra iler, Electric Brake | MGT3E | 5000008241 |
| HI900 Heater-DGN,Elec,-40 | HI900DGM | 5200014222, 5200014165 |
| MGT4E Trailer, Electric, Dual Axle, 6000LB Each | MGT4E | 5000620316 |
| G625 Generator, Standard T2 | G625 | 5100013899 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Wacker Neuson