The Wacker Neuson is a genuine OEM 20A Mini Blade Type Fuse designed for a range of Wacker Neuson compaction and concrete finishing equipment, including RD12 tandem rollers, RD11 series double drum vibratory rollers, RTKx-SC3 remote-controlled trench rollers, and CRT48 and CRT60 ride-on concrete trowels. As a factory-sourced component, the is manufactured to the exact electrical specification required by the original circuit design — ensuring correct current protection without guesswork. This fuse is a direct-fit replacement that installs into the standard mini blade fuse socket with no modification. Confirm your model number against the fitment list before ordering to ensure this is the correct amperage rating for your machine's circuit.
Key Features
- Correct 20A Rating for Protected Circuits — Matched to the amperage spec of the original fuse position, protecting the circuit without nuisance blowing or under-protection.
- Genuine OEM Component — Sourced directly from Wacker Neuson, this fuse meets the same electrical tolerances as the part installed at the factory, critical for sensitive control and hydraulic circuits.
- Mini Blade Form Factor — Fits standard mini blade fuse holders found across the RD12, RD11, RTKx-SC3, CRT48, and CRT60 electrical panels — installs in seconds with no tools.
- Wide Cross-Family Fitment — Compatible across tandem rollers, remote-controlled trench rollers, and ride-on power trowels, making it a practical stock item for fleets running mixed Wacker Neuson equipment.
- Circuit Protection You Can Trust — A blown or incorrect-rated fuse can leave control systems unresponsive or expose wiring to overcurrent damage. The right replacement restores full electrical protection immediately.
- Electrical Safety Compliance — Using the correct OEM-rated fuse ensures the circuit is protected within its designed limits, reducing the risk of wiring damage, component failure, or electrical faults during operation.
A mini blade type fuse is a compact, plug-in overcurrent protection device used throughout a machine's electrical system to safeguard individual circuits — such as control panels, solenoids, lighting, and hydraulic valve circuits — from damage caused by excess current. When a circuit draws more amperage than it is rated for, the fuse element melts and breaks the circuit, preventing wiring harness damage or component failure downstream. A blown fuse is often a symptom of an underlying electrical fault, so it is good practice to inspect the circuit before simply replacing the fuse, but having the correct rated replacement on hand is essential to restoring operation safely and quickly.
Part Details
| Part Number | 5000153489 |
|---|---|
| Old Part Number | 0153489 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | 20A Mini Blade Type Fuse |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD12A-90 ROLLER,DBL DRUM,GRN | RD12A-90 | 5000620369, 5000620058, 5000620320 |
| RD12-90 ROLLER, DOUBLE DRUM, SOLID ROPS | RD12-90 | 5000620059, 5000620321 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11AEC | 5000007695 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11V | 5000007694 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11A | 5000007693 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| CRT48-37V Trowel, Power Steer | CRT48-37V-PS | 5100024291 |
| CRT48-35V, Power Steer | CRT48-35V-PS | 5200016909 |
| CRT60-74LX | CRT60-74LX | 5100038000 |
| CRT60-74L | CRT60-74L | 5200012300 |
| Electrical | Electrical | 5100051595 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
