The Wacker Neuson is a genuine OEM Fuel Hose 5/16 X 970mm designed for the G-series portable generator lineup, including G50, G70, G85, G100, G120, G150, G180, G230, and G240 models in mobile, skid-mounted, cold weather, and custom configurations. As a direct OEM replacement, part is produced to Wacker Neuson's original specifications, ensuring correct inside diameter, wall thickness, and hose length for a drop-in installation with no trimming or adapting required. This part covers an exceptionally wide range of G-series variants — from standard mobile units to extended run tank, skid-mounted, and Transport Canada configurations — making it a reliable stocking item for fleet operators and service technicians alike. Verify your machine's model and serial number against the fitment list before ordering to confirm this is the correct hose for your generator.
Key Features
- OEM-Spec Hose Material — Manufactured to Wacker Neuson's original compound and wall-thickness specification, resisting fuel degradation and maintaining a secure seal over extended service intervals.
- Correct Length, Ready to Route — At 970mm, this hose matches the original fuel line routing path in G-series generators so it connects directly between the fuel tank and engine without cutting or splicing.
- Broad G-Series Coverage — Fits G50, G70, G85, G100, G110, G120, G125, G150, G180, G230, and G240 generators across mobile, skid-mounted, cold weather, extended run tank, and custom configurations.
- Fuel Delivery Integrity — A properly seated fuel hose maintains consistent fuel flow to the engine; a cracked or collapsing hose causes hard-starting, erratic output, or complete fuel cutoff — directly impacting generator uptime on the jobsite.
- Fuel System Safety — A deteriorated or leaking fuel hose creates a fire and spill hazard. Replacing with a genuine OEM hose restores the original pressure rating and connection integrity at every junction point.
The fuel hose routes diesel or gasoline from the generator's fuel tank to the engine's fuel system, maintaining a sealed, continuous supply of fuel at the correct flow rate. At 5/16-inch inside diameter and 970mm in length, this hose is sized to match the original routing geometry inside the G-series enclosure. When the hose cracks, hardens, or develops a pinhole — common failure modes as rubber ages or flexes under vibration — fuel supply becomes inconsistent, the engine may starve under load, and a leak hazard develops near hot engine components. Replacing a worn hose with part 5000153765 restores the sealed fuel circuit the generator depends on for steady, reliable power output.
Part Details
| Part Number | 5000153765 |
|---|---|
| Old Part Number | 0153765 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuel Hose 5/16 X 970mm |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Mobile Generator | G85 | 5000009459, 5000620003, 5000009369, 5000009310, 5000008231, 5000009305, 5000009465 |
| G70-GENERATOR, SKID, CUSTOM, DEERE T3 | G70 | 5000620648, 5000620711, 5200001318, 5200006879, 5000009260, 5000620708, 5200008342, 5200008343, 5200008341, 5000008230, 5000009464, 5200008344, 5000009478, 5100022041, 5100025814 |
| G100-GENERATOR, SKID, CUSTOM, DEERE T3 | G100 | 5000620651, 5000620650, 5000620649, 5200003158, 5000620312, 5000620313, 5000620314, 5200008346, 5200008347, 5200008345, 5100025816, 5100026957, 5100026958, 5100026959, 5100029211 |
| G120-GENERATOR, SKID, CUSTOM, DEERE T3 | G120 | 5000620654, 5000620653, 5000620652, 5200003159, 5200014467, 5200014468, 5000620311, 5200014466, 5000620309, 5000620310, 5200008350, 5200008351, 5200008349, 5100025818, 5100025840 |
| G50-GENERATOR, SKID BASE, CUSTOM T4i | G50 | 5200001062, 5200001060, 5200001061, 5000009259, 5000620707, 5000008229, 5000620964, 5000620965, 5000620966, 5000009463, 5000009477, 5100022009, 5100025812, 5100026954, 5100029210, 5100026955, 5100026956 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5000620662, 5000620300, 5000620661, 5200003162, 5000620301, 5000620302, 5100025834 |
| Mobile Generator | G150 | 5200006902, 5000620656, 5000620306, 5000620655, 5200003160, 5000620307, 5000620308, 5000620887, 5000620888, 5200010135, 5200010136, 5200010137, 5100026980, 5100026981, 5100026982, 5100029212 |
| Mobile Generator | G180 | 5000620303, 5000620658, 5000620659, 5200003161, 5000620884, 5000620304, 5000620885, 5000620305, 5200010140, 5200010138, 5200010139, 5200014471, 5100015615, 5200014469, 5100045089, 5100045575, 5100045576, 5100045590, 5100045591, 5100045592, 5100049844, 5100049845, 5000620660 |
| G230 Generator, Standard T4i | G230 | 5000620881, 5000620882, 5200010141, 5200010142, 5200010143, 5100015614, 5100045190, 5100045596, 5100045597, 5100049846, 5100049847 |
| G150 Generator,Hertz,T4 Final | G150 Generator,Hertz,T4 Final | 5100015616 |
| G40 Generator 50Hz, LATAM, Premium | G40 | 5100029184 |
| G60 Generator 50Hz, LATAM, Premium | G60 | 5100029185 |
| Mobile Generator Skid Mounted | G110 | 5000008232 |
| Mobile Generator Skid Mounted | G125 | 5000008233 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
