Wacker Neuson 5000155242 Nut 3/8-16 Hex Serrated Flange Zinc Plated
Wacker Neuson

Wacker Neuson 5000155242 Nut 3/8-16 Hex Serrated Flange Zinc Plated

$1.25
(No reviews yet) Write a Review
SKU:
5000155242-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Nut 3/8-16 Hex Serrated Flange Zinc Plated designed for the LTN6 and LTW series light towers. Sourced directly from Wacker Neuson, this fastener matches the original equipment specification for a direct, bolt-in installation with no guesswork. Fitment covers a wide range of light tower configurations including LTN6C, LTN6L, LTN6K, LTN8K, LTW6K, LTW8K, and LTW20Z series units, as well as G110 and G125 mobile generator skid mounts. When you order part number, you get the exact fastener the machine was built with.

Key Features

  • Genuine OEM Fastener Integrity — The serrated flange face bites into mating surfaces to resist loosening under vibration, maintaining clamping force through demanding light tower operation cycles.
  • Zinc Plated for Corrosion Resistance — The zinc plated finish protects against rust and surface oxidation, extending service life in outdoor and weather-exposed jobsite environments.
  • 3/8-16 Thread Spec, Drop-In Installation — Standard 3/8-16 UNC thread matches the original threaded boss or stud, allowing straightforward hand-thread installation followed by torque-to-spec tightening.
  • Broad LTN6 and LTW Series Compatibility — Confirmed fitment across LTN6C, LTN6L, LTN6K, LTN8K, LTW6K, LTW8K, and LTW20Z light tower families, as well as G110 and G125 generator skid configurations.
  • Structural Security Where It Counts — A loose or degraded fastener on a light tower mast or panel assembly can allow components to shift under load; replacing worn hardware with the correct OEM nut restores proper clamping and structural stability.

A hex serrated flange nut combines a standard hex nut with an integrated serrated washer face, eliminating the need for a separate lock washer. The serrations grip the mating surface as the nut is tightened, creating mechanical resistance to back-off caused by vibration — a common concern on light towers that run for extended periods on uneven ground. When this fastener wears, corrodes, or loses its locking ability, it can allow connected components to work loose over time, potentially compromising the integrity of panel mounts, mast hardware, or frame assemblies. Replacing it with the correct OEM part ensures the joint performs exactly as designed.

Part Details

Part Number5000155242
Old Part Number0155242
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionNut 3/8-16 Hex Serrated Flange Zinc Plated

Compatibility & Fitment

Name Model Machine Number
LTN6C, CATERPILLAR LTN6C 5000620118, 5000620551, 5000620728, 5200004091, 5200022157
LTN6C-P LIGHT TOWER,60 HZ LTN6C-P 5000620298
LTN6L, KOHLER (LOMBARDINI) LTN6L 5000620117, 5000620121, 5000620727, 5000620550, 5000620552, 5000620119, 5000620120, 5000620553, 5200004090, 5200004768, 5200012438, 5200022990, 5200017094, 5200017095, 5200022155, 5100027056
LTN6L-P LIGHT TOWER,60 HZ LTN6L-P 5000620297
LTW20Z-1, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i LTW20Z1 5000620842, 5000620375, 5200004205, 5200004096, 5200014324, 5200014326, 5200018239, 5200023191, 5200024872, 5200014328
LTW6K Light Tower, Standard T4 LTW6K 5000620372, 5000620840, 5200004094, 5200024870
LTW8K Light Tower, Standard T4 LTW8K 5000620374, 5000620841, 5200004204, 5200004095, 5200023190, 5200024871
LTW20Z-3, LIGHT TOWER 60HZ, ISUZU TIER 4i LTW20Z3 5000620376, 5000620843, 5200003583, 5200004097, 5200014325, 5200014327, 5200023192, 5200023604, 5200014329
LTN6K Light Tower LTN6K 5000620734, 5200022147
LTN8K, KUBOTA LTN8K 5000620893
LTN6L 50 Hz Non CE. Custom LTC6L 5000620559
LTN6L 50 Hz CE- RACKED LTN6LE 5200019142, 5200019143, 5200019141
Mobile Generator Skid Mounted G110 5000008232
Mobile Generator Skid Mounted G125 5000008233

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.