Wacker Neuson 5000155839 Screw M8X16 Hex Head Serrated Flange Black
Wacker Neuson

Wacker Neuson 5000155839 Screw M8X16 Hex Head Serrated Flange Black

$1.25
(No reviews yet) Write a Review
SKU:
5000155839-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Screw M8X16 Hex Head Serrated Flange Black designed for the RT and RTx series remote-controlled vibratory trench rollers. As a factory-sourced fastener, meets the exact thread pitch, head geometry, and black finish specification called out in the original Wacker Neuson assembly. Fitment covers a wide range of RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, and RTKx-SC3 trench roller configurations. Replacing a worn, stripped, or missing fastener with the correct OEM part keeps critical assemblies torqued to specification and the machine performing as intended.

Key Features

  • Integrated Serrated Flange for Vibration Resistance — The serrated underside of the flange bites into mating surfaces to resist self-loosening under the continuous vibration loads generated by trench roller operation.
  • Genuine OEM Sourcing — Supplied directly through the Wacker Neuson parts network, this screw matches the exact M8x16 thread specification, head profile, and black coating of the original installed fastener.
  • Broad RT-Series Compatibility — Fits RT56-SC, RT82-SC, RT82-SC2, RTx-SC2, RTLx-SC3, and RTKx-SC3 trench rollers, including standard, EU, and Compatec-equipped variants.
  • Correct Clamp Load Every Time — Proper thread engagement and flange diameter ensure the correct clamp load is achieved when torqued to spec, preventing joint movement that leads to accelerated wear on surrounding components.
  • Black Finish for Corrosion Protection — The black coating provides a base level of corrosion resistance suited to the wet, muddy trench environments these rollers typically operate in.

A hex head serrated flange screw is a single-piece fastener that combines a standard hex drive head with an integral toothed flange acting as a built-in lock washer. The serrations grip the clamped surface as the fastener is tightened, preventing rotation and loosening caused by vibration — a critical property on any compaction machine. When a fastener of this type is missing, damaged, or substituted with an incorrect size, the joint it secures can shift, allowing panels, guards, or mechanical assemblies to move out of alignment and suffer premature wear or failure.

Part Details

Part Number5000155839
Old Part Number0155839
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionScrew M8X16 Hex Head Serrated Flange Black

Compatibility & Fitment

Name Model Machine Number
Vibratory Trench Roller RT82-SC2 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527
Vibratory Trench Roller RT82-SC2 EU 5000620845, 5200003107
Vibratory Trench Roller RT56-SC2 5000620294, 5000620368
Vibratory Trench Roller RT56-SC2 EU 5000620844
Vibratory Trench Roller RT82-SC 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482
Vibratory Trench Roller RT56-SC 5000009026, 5000620366
RTLx-SC3 TRENCH ROLLER,GRN RTLx-SC3 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269
RTL82-SC3 ROLLER,SMOOTH DRUM RTL82-SC3 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541
RTKx-SC3 Trench Roller RTK82-SC3 5200019257, 5200019256, 5200019255
RTKx-SC3 TRENCH ROLLER,GRN RTKx-SC3 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337
Trench Roller RTx-SC2 EU 5100028378, 5200008540, 5100052330
RTx-SC2 TRENCH ROLLER RTx-SC2 5200008538, 5200008539, 5200018044, 5200018329
Trench Roller HTC15 5100065571

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.