The Wacker Neuson Clip is a genuine OEM component designed for a broad range of Wacker Neuson equipment, including PT2 and PT3 centrifugal trash pumps, PDT2 and PDT3 diaphragm trash pumps, PG2 and PG3 dewatering pumps, VP and WP series single-direction vibratory plate compactors, CT36-6 concrete power trowels, BFS floor saws, and additional models across the Wacker Neuson lineup. As a genuine OEM part, the is manufactured to the same specifications as the original component installed at the factory, ensuring a correct fit across every compatible model. This clip serves as a retention or fastening element that keeps critical assemblies properly seated during operation — an easy part to overlook but one that directly affects system integrity. Verify your model number before ordering to confirm compatibility with this multi-application clip.
Key Features
- Genuine OEM Retention Integrity — Manufactured to the original specification for consistent holding force and dimensional accuracy, so the clip seats and releases exactly as intended across all compatible assemblies.
- Drop-In Installation — Matches the original clip profile for straightforward installation without reworking mounting points or adjacent hardware.
- Wide Cross-Family Compatibility — A single part number covering PT2 and PT3 trash pumps, PDT and PG dewatering pumps, VP and WP vibratory plate compactors, CT36-6 concrete trowels, BFS floor saws, and more — simplifying procurement across a mixed fleet.
- Structural Retention Under Vibration — On compaction and pump equipment that generates continuous vibration, a correctly specified clip prevents assembly migration and component loosening that can lead to unplanned service calls.
- Sourced Through Authorized Distribution — Fulfilled as a genuine Wacker Neuson OEM part, carrying the full part number traceability expected for warranty-period and post-warranty service alike.
A clip is a fastening or retention device used to hold components, covers, hoses, wiring, or sub-assemblies securely in position within the machine. On vibration-intensive equipment such as plate compactors and trash pumps, clips must maintain their grip under continuous mechanical stress — a worn, cracked, or missing clip can allow connected components to shift, rattle loose, or separate entirely, leading to accelerated wear on surrounding parts or loss of function. Replacing a failed or missing clip promptly with the correct OEM part restores the designed retention load and keeps adjacent assemblies operating as intended.
Part Details
| Part Number | 5000156418 |
|---|---|
| Old Part Number | 0156418 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Clip |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT3 Pump | PT3 | 5000009321 |
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Single Direction Plates | AP1550R | 5000009538 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
