The Wacker Neuson Oil Dip Stick is a genuine OEM component designed for a broad range of Wacker Neuson equipment, including PT2 trash pumps, CT36-6 concrete trowels, GP2600 portable generators, PDT2 and PDT3 diaphragm trash pumps, PG2 and PG3 dewatering pumps, VP and WP series single-direction vibratory plate compactors, BPU reversible vibratory plates, BFS floor saws, and GPi3200 inverter generators. Sourced directly from Wacker Neuson, part number meets the same dimensional and material standards as the original installed at the factory. This cross-platform fitment makes it a practical stock item for fleet operators and service technicians managing mixed Wacker Neuson equipment. Confirm your model and machine number before ordering to ensure correct application.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original dimensional tolerances, ensuring the dipstick seats correctly and delivers an accurate oil-level reading every time.
- Direct Drop-In Installation — Engineered to the same thread pitch, tube length, and handle profile as the original, so it installs without modification into the existing dipstick port.
- Wide Cross-Platform Fitment — A single part number covers PT2 trash pumps, CT36-6 trowels, GP2600 generators, GPi3200 and GPSi3200 inverter generators, PDT/PDI diaphragm pumps, PG dewatering pumps, VP/WP vibratory plate compactors, BPU reversible plates, and BFS floor saws.
- Accurate Oil Monitoring — A correctly calibrated dipstick is the first line of defense against low-oil damage; a worn, bent, or missing dipstick makes it impossible to confirm safe oil levels before and during operation.
- Engine Protection Compliance — Maintaining a properly functioning dipstick is a basic requirement of engine maintenance schedules; using the correct OEM part ensures readings align with the oil-level marks specified in Wacker Neuson service documentation.
The oil dip stick provides a fast, reliable way to check the engine oil level in the crankcase without tools. It is inserted into the dipstick tube and withdrawn so the operator can read the oil level against the minimum and maximum marks on the stick. Keeping the oil within the correct range prevents engine wear caused by oil starvation and avoids overfill conditions that can damage seals or cause oil consumption. A damaged, bent, or lost dipstick makes accurate oil-level checks impossible, increasing the risk of undetected low-oil conditions that can lead to costly engine failure.
Part Details
| Part Number | 5000156454 |
|---|---|
| Old Part Number | 0156454 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Oil Dip Stick |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| Portable Inverter Generator | GPi3200 | 5000620779, 5000620781 |
| Portable Inverter Generator | GPSi3200 | 5000620780, 5000620936 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
