The Wacker Neuson 5000156534 Carburetor Complete is a genuine OEM Carburetor Complete designed for a wide range of Wacker Neuson equipment, including VP and WP series single-direction vibratory plates, CT36-6 walk-behind concrete power trowels, PT2 centrifugal trash pumps, PG3 dewatering pumps, and BFS floor saws. As a direct genuine OEM component, the part is manufactured to the same specification as the original part installed at the factory, ensuring a seamless fit across all compatible models. Cross-reference your model number before ordering to confirm compatibility within this broad fitment range. Keep part number 5000156534 on hand as a planned service item to avoid unscheduled engine downtime across your fleet.
Key Features
- Genuine OEM Fuel Metering Accuracy — Manufactured to OEM specification, this carburetor delivers the precise air-fuel mixture ratio required for consistent small-engine performance across all listed models.
- Drop-In Engine Compatibility — Engineered to match the original carburetor mounting pattern, fuel inlet, and throttle linkage connections, allowing direct installation without modification to fuel lines or throttle cables.
- Broad Multi-Machine Fitment — A single part number covering VP and WP vibratory plates, CT36-6 concrete trowels, PT2 and PG3 pumps, and BFS floor saws, making it an efficient stocking part for mixed Wacker Neuson fleets.
- Protects Engine Starting and Idle Stability — A correctly functioning carburetor maintains clean cold starts, smooth idle, and full-throttle power delivery; a worn or clogged unit causes hard starting, rough running, and fuel waste.
- Fuel System Integrity — OEM-sourced gaskets, needle valves, and internal passages are matched to the engine's fuel delivery requirements, reducing the risk of lean-running conditions that can cause premature engine wear.
The carburetor is responsible for mixing air and fuel in the correct ratio before the mixture enters the engine's combustion chamber. On small gasoline engines like those found in vibratory plates, trowels, pumps, and saws, the carburetor controls everything from cold-start enrichment to wide-open-throttle fuel delivery. Replacing a degraded carburetor with a genuine OEM unit restores the engine's designed fuel curve and brings performance back to spec.
Part Details
| Part Number | 5000156534 |
|---|---|
| Old Part Number | 0156534 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Complete |
Compatibility & Fitment
| Name | Models | Machine Number |
|---|---|---|
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Floor Saw | BFS 12 | 5000630092 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| PT2 Pump | PT2 | 5000009318, 5000009320, 5000009319 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Single Direction Plate | VPR70 | 5000006909 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| WP 2050W | WP2050W | 5000630023 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
