The Wacker Neuson is a genuine OEM Spark Plug Terminal Cap designed for a wide range of Wacker Neuson equipment, including CT36 and CT48 concrete power trowels, PT2 and PT3 centrifugal trash pumps, GP2600 and GP4000 portable generators, VP and WP series single-direction vibratory plate compactors, BPU reversible vibratory plate compactors, BFS floor saws, and PDT and PG series pumps. Sourced directly from Wacker Neuson, this is the same component installed at the factory, ensuring correct fit and function across all listed models. As a genuine OEM part, meets the original design specifications — no guesswork on compatibility. With fitment spanning concrete, compaction, pump, and power generation equipment, this terminal cap is a high-demand service item worth keeping on the shelf.
Key Features
- Genuine OEM Ignition Interface: — Manufactured to Wacker Neuson's original spark plug terminal specification, ensuring correct dielectric performance and secure mechanical retention on the plug tip.
- Direct Drop-In Replacement: — Connects to the ignition wire and plug boot exactly as the original, with no splicing, adapting, or repin work required.
- Broad Cross-Family Fitment: — A single part number covers CT trowels, PT and PG pumps, GP generators, VP/WP/BPU vibratory plates, BFS floor saws, and PDT diaphragm pumps across dozens of machine configurations.
- Ignition Continuity Protection: — A properly seated terminal cap maintains the low-resistance connection needed for a strong, consistent spark — a worn or cracked cap causes misfires, hard starting, and rough engine performance.
- Fuel System Safety Relevance: — A secure, insulated terminal cap prevents unintended arcing near fuel vapors, making correct replacement important any time the ignition wire or plug is serviced.
The spark plug terminal cap is the connector that joins the ignition wire to the top of the spark plug, securing the high-voltage signal needed to fire the engine's air-fuel mixture. It provides both the mechanical grip that holds the wire to the plug and the insulation that keeps that voltage from leaking to surrounding metal. When the cap cracks, corrodes, or loses its grip, the ignition signal weakens or drops out entirely — leading to hard starts, misfires, or a no-start condition. Replacing a damaged terminal cap restores full ignition continuity and gets the engine firing cleanly again.
Part Details
| Part Number | 5000156555 |
|---|---|
| Old Part Number | 0156555 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Spark Plug Terminal Cap |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-9-V Trowel | CT36-9-V | 5000009447, 5000620834 |
| PT3 Pump | PT3 | 5000009321, 5000009322, 5000009323 |
| CT36-9 Trowel | CT36-9 | 5000009444, 5000620833 |
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT48-9 Trowel | CT48-9 | 5000009453, 5000620838 |
| Premium Portable Generator | GP4000 | 5000620090, 5000620380, 5000620977, 5000620978, 5000620089 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| BFS 935 SAW,BASIC | BFS 935B | 5000008911 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Floor Saw | BFS16 | 5000630098 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| Floor Saw | BFS 90R | 5000009522 |
| Floor Saw | BFSX 90R | 5000009525 |
| BFS 914B SAW | BFS 914B | 5000610093 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| Petrol Floor Saw BFS 940W | BFS 940W | 5000610328, 5100004005 |
| Floor Saw | BFSX16 | 5000630248 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| Portable Inverter Generator | GPi3200 | 5000620779, 5000620960, 5000620781 |
| Portable Inverter Generator | GPSi3200 | 5000620780, 5000620961, 5000620936 |
| GPi4300 | GPi4300 | 5000620962, 5000620782, 5000620784 |
| GPSi4300 | GPSi4300 | 5000620963, 5000620783, 5000620937 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
| Floor Saw | BFS 914W | 5100004003 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
