The Wacker Neuson Wing Nut is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including PT2 centrifugal trash pumps, CT36-6 concrete trowels, VP and WP series single-direction vibratory plate compactors, BPU reversible vibratory plates, PDT and PG series pumps, BFS floor saws, and GH series generators. As a direct OEM replacement, this wing nut is manufactured to the same standards as the original hardware installed at the factory. With fitment spanning dozens of machine configurations across multiple product families, part number is a high-demand service item worth keeping on hand. Always verify your machine's model and serial number before ordering to confirm compatibility.
Key Features
- Genuine OEM Hardware Integrity — Manufactured to Wacker Neuson's original thread specification and dimensional tolerances, ensuring correct torque engagement and secure fastening without stripping or cross-threading.
- Hand-Tighten Installation — The wing nut design allows tool-free installation and removal, making it ideal for access panels, guards, and service points that require frequent adjustment or inspection.
- Broad Cross-Family Fitment — A single part number covers VP/WP vibratory plates, PT2/PDT/PG pumps, CT36-6 trowels, BPU reversible plates, BFS floor saws, and GH generators — stocking one part serves multiple machines.
- Consistent Clamping Force — Correct thread form and material grade maintain proper clamping load on covers, guards, and service components, preventing loosening under vibration — critical on compaction and pump equipment.
- Corrosion and Wear Resistance — OEM material selection resists the moisture, concrete slurry, and field conditions these machines routinely encounter, extending the service life of the fastener.
A wing nut is a threaded fastener with two flat projecting wings that allow it to be tightened and loosened by hand without any tools. On compaction equipment, pumps, trowels, and saws, wing nuts are commonly used to secure access covers, air filter housings, guards, and service panels that technicians or operators need to open regularly during maintenance. When a wing nut becomes damaged, stripped, or corroded, it can compromise the secure retention of those components — leading to covers that rattle loose under vibration or guards that cannot be properly secured during operation. Replacing a worn wing nut promptly with the correct OEM part restores the intended fastening function and keeps service intervals quick and straightforward.
Part Details
| Part Number | 5000156757 |
|---|---|
| Old Part Number | 0156757 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Wing Nut |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
