The Wacker Neuson Shockmount is a genuine OEM component designed for the BS50, BS60, BS70, BS65, DS70, and BS-4As series vibratory rammers. As a direct OEM replacement, this shockmount meets the original engineering specifications set by Wacker Neuson, ensuring a correct fit across the broad range of two-cycle, four-cycle, oil-injected, and battery-assist rammer models in the BS and DS families. Part number covers an extensive fitment range spanning standard, high-altitude, EU, and variable-speed rammer configurations. Keep a spare on hand to maintain consistent machine performance across demanding compaction cycles.
Key Features
- OEM-Grade Vibration Isolation: — Manufactured to Wacker Neuson's original material and durometer specifications, this shockmount delivers the correct dampening characteristics needed to protect the rammer's upper assembly from repetitive impact forces.
- Drop-In Replacement: — Engineered to match the original mounting geometry, this shockmount installs in the same position and orientation as the factory part, with no rework to surrounding components required.
- Broad Rammer Family Coverage: — Fits BS50, BS60, BS70, BS65, BS-4As, and DS70 series rammers across two-cycle, four-cycle, oil-injected, variable-speed, and battery-assist variants, including standard and high-altitude configurations.
- Protects Critical Upper Assembly Components: — A functioning shockmount absorbs and isolates the high-frequency percussive energy generated by the rammer's exciter mechanism. When this part degrades, excessive vibration transfers directly into the handle and upper frame, accelerating wear on surrounding components.
- Operator Comfort and HAV Compliance: — Proper shockmount condition directly affects the level of hand-arm vibration (HAV) transmitted to the operator. Replacing a worn shockmount helps maintain vibration levels within the design parameters Wacker Neuson established for operator safety and regulatory compliance.
The shockmount is a rubber-bonded isolator that sits between the rammer's lower exciter housing and the upper engine and handle assembly. Its job is to absorb the intense, repetitive impact energy produced during compaction and prevent it from transferring up through the frame. When a shockmount hardens, cracks, or separates from its bonded surfaces, the upper assembly is exposed to full percussive shock loads — leading to accelerated wear on engine mounts, handle welds, and control components, while also dramatically increasing vibration felt by the operator.
Part Details
| Part Number | 5000156979 |
|---|---|
| Old Part Number | 0156979 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shockmount |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5200010976, 5000009342, 5000009402, 5000009403 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223, 5200013518 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5000009396, 5100016651 |
| 280/11in Shoe, Vibratory Ramme r | ES50 | 5200013514, 5200013515 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
