The Wacker Neuson Pitch Control Handle is a genuine OEM component designed for CRT36 and CRT48 series ride-on concrete power trowels. As a direct OEM replacement sourced through authorized Wacker Neuson supply channels, part number is manufactured to the same standards as the original — ensuring correct feel, travel, and mechanical response at the operator station. This handle is confirmed to fit an extensive range of CRT models including the CRT36-24A, CRT36-25, CRT36-26A, CRT48-31V, CRT48-33K, CRT48-34V, CRT48-35L, CRT48-35V, CRT48-37V, CRT48-57K, and their associated variants including Power Steer, Dual-Fuel, high-speed, and EU-spec configurations. When the pitch control handle wears or breaks, blade pitch adjustment becomes unreliable, which directly impacts finish quality and operator control — making prompt replacement essential on any active finishing crew.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original specifications, ensuring the correct range of motion, grip geometry, and mechanical engagement that the pitch control linkage depends on.
- Direct Bolt-On Replacement — Designed to connect directly to the existing pitch control linkage on CRT36 and CRT48 trowels with no modification to the operator console or control assembly.
- Broad CRT Series Coverage — Fits a wide range of CRT36 and CRT48 models including standard, high-speed, Power Steer, Dual-Fuel, Electronic Steering, and EU-spec variants across multiple production runs.
- Consistent Blade Pitch Response — A correctly functioning pitch control handle allows operators to make precise float-to-finish adjustments, maintaining consistent surface quality throughout the finishing pass.
- Verified Part Number — Ordering by Wacker Neuson part number 5000157015 eliminates guesswork and confirms you are receiving the correct handle for your specific CRT model and serial number range.
The pitch control handle is the primary operator input for adjusting blade pitch angle on a ride-on concrete trowel. By rotating or actuating this handle, the operator changes the angle of the finishing blades relative to the concrete surface — transitioning the machine from floating to finishing and controlling the aggressiveness of the pass. A worn, cracked, or broken pitch control handle makes it difficult or impossible to set and hold the correct blade angle, leading to uneven surface texture, blade chatter, or loss of control over the finishing process. Replacing a damaged handle promptly keeps the operator in full command of blade pitch throughout every stage of the finishing cycle.
Part Details
| Part Number | 5000157015 |
|---|---|
| Old Part Number | 0157015 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Pitch Control Handle |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CRT48-35L Trowel | CRT48-35L | 5000620113, 5000620806 |
| CRT48-35V | CRT48-35V | 5000620112 |
| CRT48-35V | CRT48-35V EU | 5000620807 |
| 915mm/36in Ride-on Trowel | CRT36-25 | 5000620115, 5000620295, 5000620803, 5000620804 |
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| 1220mm/48in Ride-on Trowel | CRT48-31V | 5000620476 |
| 915mm/36in Ride-On Trowel | CRT36-24A | 5000620080, 5000620299, 5000620801, 5000620802 |
| 1220mm/48in High Speed Ride-On Trowel | CRT48-31V-H | 5000009086 |
| 1220mm/48in Low Speed Ride-On Trowel | CRT48-25K-L | 5000009084 |
| 1220mm/48in High Speed Ride-On Trowel | CRT48-25K-H | 5000009085 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-23K-H | 5000009083 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-24A-H | 5000009232 |
| CRT48-35L-PS | CRT48-35L-PS | 5000620704 |
| CRT48-35L-PS | CRT48-35L-PS EU | 5000620900 |
| Ride-on Trowel | CRT48-31V-E | 5000009481 |
| Ride-on Trowel | CRT48-31V-ES-E | 5000009482 |
| Ride-on Trowel | CRT36-24A-E | 5000009483 |
| CRT36-26A Trowel w/Wheel Kit | CRT36-26A | 5000621000, 5000620999, 5000621001, 5000621002 |
| 1220mm/48in Ride-on Trowel, El ectronic Steering | CRT48-31V-ES | 5000009216 |
| CRT48-33K | CRT48-33K | 5200002353 |
| CRT48-33K Trowel, Dual-Fuel | CRT48-33K DF | 5200007686, 5200007687 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-25K-H | 5000620027 |
| CRT48-33K | CRT48-33k | 5200002354 |
| CRTv 36-26A Trowel, w/Wheel Kit | CRTv36-26A | 5200008544, 5200008545, 5200008546 |
| CRT48-57K Trowel, Power Steer | CRT48-57k-PS | 5200018779 |
| CRT48-37V Trowel | CRT48-37V | 5100024209 |
| CRT48-57K Trowel | CRT48-57K-MS | 5100018892 |
| CRT48-37V Trowel, Power Steer | CRT48-37V-PS | 5100024291 |
| CRT48-57K-PS | CRT48-57k-PS EU | 5200018820 |
| CRT48-35V, Power Steer | CRT48-35V-PS | 5200016909 |
| CRT48-37V | CRT48-37V EU | 5100024290 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
