The Wacker Neuson is a genuine OEM Tube Clip Clamp designed for the RD7 series walk-behind tandem rollers and the G70 through G240 series skid-mounted and mobile generators. Sourced directly from Wacker Neuson, this part carries the same design and material specifications as the original component installed at the factory. Confirmed fitment spans multiple RD7H variants — including the RD7H-ES and RD7H-S — as well as a broad range of G-series generator configurations including cold-weather and switchable 600V Tier 3 builds. Having the correct part number, on hand ensures a straightforward swap with no guesswork on compatibility.
Key Features
- Genuine OEM Construction: — Manufactured to Wacker Neuson's original material and dimensional tolerances, ensuring the clamp maintains proper tube retention force over the full service life of the machine.
- Direct Drop-In Replacement: — Matches the original mounting configuration on RD7 and G-series assemblies, so the clamp seats and secures tubes exactly as designed without reworking surrounding hardware.
- Broad Confirmed Fitment: — Compatible with RD7H-ES, RD7H-S, and RD7-RAW tandem rollers, plus G70, G100, G120, G150, G180, and G240 generator models across standard, cold-weather, and custom 600V Tier 3 builds.
- Secure Tube Routing: — A correctly functioning tube clip clamp keeps fluid or conduit lines properly routed and vibration-isolated; a failed or missing clamp allows lines to chafe, fatigue, and eventually leak or fail under sustained machine operation.
- Fuel and Fluid System Integrity: — On both compaction and generator equipment, unsecured lines near heat sources or moving components present a genuine safety concern; replacing a worn clamp restores the designed clearance and line support.
A tube clip clamp is a small but essential retention component that holds hydraulic, fuel, coolant, or conduit lines in a fixed position relative to the machine frame. By securing these lines against vibration and incidental contact, the clamp prevents wear-through, chafing, and fatigue cracking that can develop over hours of continuous operation. On heavy-use equipment like tandem rollers and generator sets, a missing or degraded clamp can allow lines to contact hot surfaces or rotating components, making timely replacement an important part of routine service.
Part Details
| Part Number | 5000157071 |
|---|---|
| Old Part Number | 0157071 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Tube Clip Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD 7ES | RD7H-ES EU | 5000620794 |
| RD 7S | RD7H-S EU | 5000620795 |
| RD7H-ES Tandem Roller | RD7H-ES | 5000009408 |
| RD7H-S ROLLER,DOUBLE DRUM | RD7H-S | 5000009487 |
| Walk-behind Vibratory Roller ( no engine) | RD7-RAW | 5000620079, 5000620596, 5000620478 |
| Double Drum Vibratory Roller | RD7H | 5000008042 |
| G70-GENERATOR, SKID, CUSTOM, DEERE T3 | G70 | 5000620648, 5200014464, 5200008341, 5100025814, 5100025838 |
| G100-GENERATOR, SKID, CUSTOM, DEERE T3 | G100 | 5000620651, 5000620313, 5000620314, 5200008347, 5000620650, 5100025816, 5100026958, 5100029211 |
| G120-GENERATOR, SKID, CUSTOM, DEERE T3 | G120 | 5000620654, 5200014467, 5000620311, 5000620310, 5200008351, 5000620653, 5100025818, 5100025840, 5200001320 |
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5000620307, 5000620308, 5000620656, 5100026981, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5000620304, 5000620305, 5200014470, 5000620659, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5000620301, 5000620302, 5000620662, 5100025834 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
