The Wacker Neuson Connecting Rod is a genuine OEM component designed for BS50-4, BS50-4s, BS60-4, and BS60-4s series vibratory rammers, as well as the GPi1700 portable inverter generator. As a direct genuine OEM replacement, this connecting rod is produced to the same tolerances and material specifications as the original part fitted at the factory. It is compatible across a wide range of BS-series rammer configurations including standard, high-altitude, and EU variants, making it a versatile service part for fleets running multiple BS-family machines. Always verify your machine's model and serial number against the fitment list before ordering to ensure correct application.
Key Features
- Genuine OEM Dimensional Accuracy — Manufactured to exact bore, length, and bearing tolerances required by the BS-series four-stroke engine, ensuring correct crankshaft-to-piston geometry is maintained after replacement.
- Drop-In Engine Replacement — Engineered to install directly in place of the original rod with no machining or modification to the engine block, crankshaft, or piston pin required.
- Broad BS-Series Compatibility — Confirmed fitment across BS50-4, BS50-4s, BS60-4, and BS60-4s vibratory rammers in standard, EU, and high-altitude configurations, plus the GPi1700 portable inverter generator.
- Sustained Compression and Power Stroke — A correctly fitted connecting rod maintains proper compression ratio and piston travel, keeping the rammer's impact energy and compaction output at rated performance levels.
- Engine Safety Under Load — A worn or cracked connecting rod risks catastrophic engine failure under the high-cycle stress of rammer operation; replacing with a genuine OEM rod eliminates this risk before it causes secondary damage.
The connecting rod is the critical link between the piston and the crankshaft inside a four-stroke engine. It converts the linear up-and-down motion of the piston into the rotational force that drives the crankshaft, which in turn powers the rammer's percussion mechanism. When a connecting rod is worn, bent, or cracked — common results of insufficient lubrication or high-hour operation — it causes loss of compression, abnormal vibration, excessive engine noise, and in severe cases, total engine seizure that can destroy the crankshaft and cylinder bore.
Part Details
| Part Number | 5000158635 |
|---|---|
| Old Part Number | 0158635 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Connecting Rod |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223, 5200013518 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| Vibratory Rammer, 280mm/11in S hoe | BS500-4 | 5000009329 |
| Vibratory Rammer, 280mm/11in S hoe | BS600-4 | 5000009331 |
| Portable Inverter Generator | GPi1700 | 5000620777, 5000620778 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
