The Wacker Neuson is a genuine OEM Muffler designed for the BS50-4s, BS60-4s, BS50-4, and BS60-4 series gasoline vibratory rammers. As a genuine OEM part, the is manufactured to the same specifications as the original component installed at the factory, ensuring a correct, trouble-free fit. This Muffler is compatible across a wide range of BS-series rammer configurations, including standard, EU, high-altitude, and HO variants. If your rammer is running louder than normal, producing excessive exhaust, or showing signs of heat damage near the exhaust outlet, replacing the muffler promptly protects both operator safety and engine performance.
Key Features
- Genuine OEM Exhaust Specification — Built to the exact back-pressure and heat-tolerance requirements of the BS-series four-stroke engine, preserving correct exhaust flow and combustion efficiency.
- Direct Bolt-On Replacement — Mounts to the existing exhaust port using the original hardware pattern, requiring no drilling, re-tapping, or bracket modification.
- Broad BS-Series Fitment — Confirmed for BS50-4s, BS60-4s, BS50-4, BS60-4, BS50-4HO EU, and MS54 vibratory rammers across standard, EU, and high-altitude configurations.
- Protects Engine and Operator — A correctly sealed muffler contains hot exhaust gases and directs them safely away from the operator and fuel system; a cracked or failed muffler creates a burn and fire hazard on an engine that runs close to the operator's body.
- Sustained Power Output — Proper exhaust back-pressure is critical to four-stroke rammer performance; a damaged muffler causes power loss, rough running, and increased fuel consumption during compaction work.
The muffler collects exhaust gases from the engine's cylinder head and channels them out of the machine while reducing noise and managing heat. On a vibratory rammer, which operates under continuous high-impact cyclic loading, the muffler is subject to significant vibration stress and thermal cycling, making it one of the components most prone to cracking or loosening over time. A failed or leaking muffler exposes the operator to excessive heat and harmful exhaust gases, and the resulting change in exhaust back-pressure can cause the engine to run rich, lose power, or overheat — directly reducing the rammer's compaction force and efficiency.
Part Details
| Part Number | 5000159209 |
|---|---|
| Old Part Number | 0159209 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Muffler |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223, 5200013518 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| Vibratory Rammer, 280mm/11in S hoe | BS500-4 | 5000009329 |
| Vibratory Rammer, 280mm/11in S hoe | BS600-4 | 5000009331 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
