The Wacker Neuson Flange Bolt is a genuine OEM Flange Bolt designed for the BS50-4s, BS60-4s, BS50-4, and BS60-4 series vibratory rammers, as well as the GPi1700 portable inverter generator. As a direct OEM part, the is manufactured to the same specifications as the original hardware installed at the factory, ensuring a correct, secure fit with no guesswork. This Flange Bolt ships with the integrated flange face that distributes clamping load evenly across the mating surface, making it a straightforward drop-in replacement during routine service or repair. If you are maintaining a BS50-4s, BS60-4, BS60-4s, or GPi1700 unit, verifying the part number against your machine's parts diagram is the fastest way to confirm compatibility before ordering.
Key Features
- OEM-Grade Clamping Strength — Manufactured to the original torque and load specifications for this fastener position, maintaining proper joint integrity on vibratory rammer and generator assemblies.
- Integrated Flange Design — The built-in flange washer face spreads clamping force evenly across the mating surface, eliminating the need for a separate washer and ensuring consistent seating on installation.
- Broad BS-Series and GPi Compatibility — Fits multiple configurations of the BS50-4s, BS50-4, BS60-4s, and BS60-4 vibratory rammers, plus the GPi1700 portable inverter generator — covering a wide range of Wacker Neuson service needs with a single part number.
- Genuine OEM Sourcing — Supplied directly through the Wacker Neuson OEM parts network, so thread pitch, head dimensions, and material grade match the original hardware exactly as specified for these machines.
- Structural Fastener Reliability — A loose or damaged flange bolt in a vibratory rammer can allow components to shift under high-frequency impact loads, leading to accelerated wear or assembly failure; replacing with the correct OEM bolt restores secure, stable operation.
A flange bolt combines a standard hex bolt with an integrated washer-like flange beneath the head, allowing it to distribute clamping force over a wider surface area without a separate washer. In high-vibration applications like a vibratory rammer, this is especially important — the flange face resists loosening and maintains joint preload even under continuous impact cycles. When a flange bolt wears, corrodes, or is damaged during service, replacing it with the correct OEM part ensures the fastened assembly stays properly torqued and structurally sound throughout operation.
Part Details
| Part Number | 5000159211 |
|---|---|
| Old Part Number | 0159211 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Flange Bolt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| Vibratory Rammer, 280mm/11in S hoe | BS500-4 | 5000009329 |
| Vibratory Rammer, 280mm/11in S hoe | BS600-4 | 5000009331 |
| Portable Inverter Generator | GPi1700 | 5000620777, 5000620778 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
