The Wacker Neuson Glow Plug Wire is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including the CRT48-35L ride-on concrete trowel series, LTN6L, LTN6LE, LTN6L-V, LTC4L, and LTV6L light towers, the DPU 130Le reversible vibratory plate compactor, and select PT6 series trash pumps. As a direct OEM replacement, this wire is sourced and supplied to the same specification as the original part installed at the factory. Correct fitment across such a broad equipment range means part number verification is critical — confirm your model and machine number before ordering. The Wacker Neuson ensures the glow plug circuit delivers reliable ignition support in every applicable application.
Key Features
- Genuine OEM Electrical Integrity — Manufactured to Wacker Neuson's original wiring specification, ensuring correct conductor gauge, insulation rating, and terminal connection for a properly functioning glow plug circuit.
- Drop-In Terminal Connection — Engineered to connect directly to the glow plug and harness connector on compatible models with no splicing or modification to the wiring loom.
- Broad Cross-Family Fitment — Confirmed for CRT48-35L ride-on trowels, LTN6L / LTN6LE / LTN6L-V / LTC4L / LTV6L light towers, DPU 130Le plate compactor, and PT6LT / PT6LS trash pump variants.
- Cold-Start Performance — A sound glow plug wire delivers the full voltage signal that allows the glow plugs to pre-heat the combustion chamber, supporting fast, clean cold-weather starts on diesel-powered equipment.
- Electrical Safety Compliance — Using a correctly rated OEM wire in the glow plug circuit prevents resistance faults, insulation breakdown, and potential wiring damage that can result from incorrect aftermarket substitutes.
The glow plug wire is the electrical conductor that carries current from the engine control circuit to the glow plug itself. In diesel engines, glow plugs pre-heat the combustion chamber before and during cranking, allowing the engine to start reliably — especially in cold conditions. If the wire develops a break, corroded terminal, or insulation fault, the glow plug receives insufficient voltage, resulting in hard starting, excessive cranking, or failure to start altogether. Replacing a damaged wire with the correct OEM part restores the full electrical signal and protects the glow plug from premature failure caused by inconsistent supply.
Part Details
| Part Number | 5000160194 |
|---|---|
| Old Part Number | 0160194 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Glow Plug Wire |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CRT48-35L Trowel | CRT48-35L | 5000620113, 5000620806 |
| LTN6L, KOHLER (LOMBARDINI) | LTN6L | 5000620117, 5000620121, 5000620727, 5000620550, 5000620552, 5000620119, 5000620120, 5000620553, 5200004090, 5200004768, 5200012438, 5200022990, 5200017094, 5200017095, 5200022155, 5100027056 |
| LTN6L-P LIGHT TOWER,60 HZ | LTN6L-P | 5000620297 |
| CRT48-35L-PS | CRT48-35L-PS | 5000620704 |
| CRT48-35L-PS | CRT48-35L-PS EU | 5000620900 |
| LTN6L 50 Hz Non CE. Custom | LTC6L | 5000620559 |
| LTN6L-V LIGHT TOWER,50HZ | LTN6L-V | 5200002720, 5200002721, 5200002716, 5200002717, 5200002718, 5200002719, 5200017102, 5200019283 |
| LTN6L-V S, KOHLER (LOMBARDINI) | LTN6L-V S | 5200018536, 5200018539, 5200018573, 5200018552, 5200023687, 5200023688, 5200023689, 5200018576 |
| Light Tower | LTC4L | 5000009375, 5000009377, 5000009379, 5000009485, 5000009311 |
| DPU 130Le | DPU 130Le | 5000610143 |
| LTN6LE-V 50 Hz CE 230 V LED | LTN6LE-V | 5200019285, 5200019140 |
| DPU130Le | DPU130Le CH/US | 5000610424 |
| Light Tower with Power Winch | LTC4L-P | 5000620018 |
| PT6LT Pump w/Trailer T4 | PT6LT | 5200014740 |
| LTN6L 50 Hz CE- RACKED | LTN6LE | 5200019142, 5200019143, 5200019141 |
| E3000 | E3000 | 5100055568, 5100056441, 5100056440 |
| PT6LS Pump | PT6LS | 5200014741 |
| PT 6LS | PT6LS(I) | 5200017427 |
| Trash Pump | PT6LT(I) | 5100014076 |
| Engine/Generator cpl. | Engine/Generator cpl. | 5100039560 |
| Light Tower | LTV6L | 5100039607 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
