Wacker Neuson 5000161211 Ring Terminal 5/16 22-18 AWG
Wacker Neuson

Wacker Neuson 5000161211 Ring Terminal 5/16 22-18 AWG

$1.25
(No reviews yet) Write a Review
SKU:
5000161211-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Ring Terminal 5/16 22-18 AWG is a genuine OEM electrical connector designed for the G-Series portable generator lineup, spanning models from the G25 and G50 through the G85, G100, G120, G150, G180, and G240. As a genuine OEM part, is manufactured to the exact crimp geometry, conductor range, and stud size specified for these generators — ensuring a secure, low-resistance connection every time. This terminal is confirmed to fit an extensive range of G-Series configurations including skid-mounted, cold weather, extended run tank, and custom Tier 3 and Tier 4 variants. Whether you are restoring a wiring harness or replacing a corroded connection point, this is the correct part for the job.

Key Features

  • OEM-Specified Conductor Range — Rated for 22–18 AWG wire, matching the gauge used in Wacker Neuson G-Series generator wiring harnesses for a proper crimp every time.
  • 5/16-Inch Stud Size — The 5/16-inch ring bore seats directly onto the correct terminal studs found throughout G-Series generator electrical systems without modification.
  • Broad G-Series Compatibility — Fits G25, G50, G70, G85, G100, G120, G125, G150, G160, G180, and G240 models across skid-mounted, cold weather, custom, and extended run tank configurations.
  • Low-Resistance Connection — A correctly installed ring terminal maintains a solid electrical bond at the termination point; a corroded or improperly sized terminal can introduce resistance that disrupts generator output and control circuits.
  • Electrical Safety Compliance — Using the OEM-specified terminal ensures the connection meets the original insulation and current-handling requirements for the circuit, which is critical in generator electrical systems carrying live load current.

A ring terminal is a small but essential electrical connector that fastens a wire end securely to a stud or screw terminal, creating a stable, vibration-resistant electrical bond. In a portable generator like the Wacker Neuson G-Series, ring terminals are used throughout the wiring harness — on grounding points, control panel connections, and power circuit terminations — where a reliable, gas-tight crimp is required to handle continuous current flow. When a ring terminal corrodes, cracks, or pulls free, the affected circuit can experience intermittent faults, voltage drops, or complete loss of continuity, disrupting generator output or control functions until the terminal is replaced.

Part Details

Part Number5000161211
Old Part Number0161211
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionRing Terminal 5/16 22-18 AWG

Compatibility & Fitment

Name Model Machine Number
Skid-mounted Mobile Generator, Custom G70 5000620352, 5000620351, 5000009468, 5000620002
Skid-mounted Mobile Generator G50 5000009467, 5000620001, 5200001062, 5200001063, 5200001061, 5200014322, 5200014320, 5000620710, 5100045494, 5000620964, 5000620965, 5000620966, 5100042431, 5100045493, 5100042432, 5100025812, 5100029210, 5100026955, 5100026956
Mobile Generator, Custom G25 5000620346, 5000620345
Mobile Generator G85 5000009459, 5000620003
Mobile Generator (Cold Weather ) G120 5000620291, 5000620292, 5000620654, 5000620653, 5200003159, 5200003856, 5200003855, 5200014467, 5200014468, 5000620311, 5000620310, 5200008350, 5200008351, 5100025818, 5100025840
Mobile Generator (custom) G160 5000620069, 5000620070
G100-GENERATOR, SKID, CUSTOM, DEERE T3 G100 5000620651, 5000620650, 5200003158, 5200003859, 5200003858, 5000620313, 5000620314, 5200008346, 5200008347, 5100025816, 5100026958, 5100026959, 5100029211
G150-GENERATOR, SKID, CUSTOM, DEERE T3 G150 5000620657, 5000620656, 5200003160, 5000620307, 5000620308, 5100026981, 5100026982, 5100029212, 5100025830
G180-GENERATOR, SKID, CUSTOM, DEERE T3 G180 5000620660, 5000620659, 5200003161, 5000620304, 5000620305, 5200014470, 5200014471, 5100025832, 5100025842
G240-GENERATOR, SKID, CUSTOM, DEERE T3 G240 5000620663, 5000620662, 5200003162, 5000620301, 5000620302, 5100025834
Mobile Generator (custom) G125 5000620067, 5000620068

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.