The Wacker Neuson is a genuine OEM Bolt M10 X 1.5 designed for the RD27-100 and RD27-120 hydrostatic vibratory tandem rollers. As a direct factory replacement, this bolt is manufactured to the exact thread pitch, grade, and dimensional spec required by the original assembly. Wacker Neuson OEM fasteners are sourced through authorized channels, ensuring the hardware meets the torque and clamping requirements of the application. If you are working on an RD27-series roller, part number is the correct OEM fastener to restore the machine to proper operating condition.
Key Features
- Correct Thread Specification: — M10 x 1.5 thread form matches the original tapped bore exactly, ensuring full thread engagement without cross-threading or stripping.
- Genuine OEM Sourcing: — Manufactured to Wacker Neuson's original material grade and hardness rating, delivering the clamping force the assembly was engineered around.
- Direct Replacement for RD27 Series: — Confirmed fitment for RD27-100 and RD27-120 hydrostatic vibratory tandem rollers; drop-in installation with no reworking of mating components.
- Structural Integrity Where It Counts: — On a vibratory roller, fasteners are subject to continuous dynamic loading; using an under-spec bolt risks joint loosening, component misalignment, or structural failure during operation.
- Single-Part Fix: — Stocking the correct OEM bolt means the repair is completed in one step, with no need to source a hardware-store substitute that may not match grade or thread class.
A bolt of this specification serves as a critical fastener within the structural or drivetrain assemblies of the RD27-series hydrostatic vibratory roller. On a machine that generates continuous vibration during compaction passes, every fastener in the assembly must maintain its clamping load under cyclic stress. A bolt that is the wrong grade, thread pitch, or length can work loose under vibration, leading to component movement, accelerated wear on surrounding parts, or an unsafe condition that takes the machine out of service. Replacing a worn or damaged fastener with the correct OEM part restores the joint to its intended clamping specification and keeps the roller performing reliably on the asphalt or soil compaction site.
Part Details
| Part Number | 5000162033 |
|---|---|
| Old Part Number | 0162033 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bolt M10 X 1.5 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydrostatic Vibratory Roller | RD27-100 | 5000620007, 5000620037 |
| Hydrostatic Vibratory Roller | RD27-120 | 5000009469, 5000620038 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
