The Wacker Neuson is a genuine OEM Choke Shaft Assembly designed for the VP1030A, VP1030AW, and WP1030A series single-direction vibratory plate compactors. Sourced directly from Wacker Neuson, this assembly carries the same part number and specification as the original component fitted at the factory. Confirmed fitment spans multiple build variants across the VP1030A and WP1030A families, making it the go-to replacement when the choke mechanism on your plate compactor becomes worn, stiff, or unresponsive. Order with confidence knowing part number is an exact match for these machines.
Key Features
- Genuine OEM Construction: — Manufactured to the same tolerances and material spec as the original choke shaft, ensuring the assembly operates smoothly through its full range of motion without binding or slipping.
- Direct-Swap Installation: — Replaces the original choke shaft assembly on the VP1030A, VP1030AW, and WP1030A plate compactors using existing mounting points, with no modification to the carburetor or choke linkage required.
- Broad Variant Coverage: — Compatible across multiple build codes within the VP1030A and WP1030A model families, covering both the standard and AW (wide-plate) variants.
- Restored Cold-Start Performance: — A correctly functioning choke shaft delivers the proper fuel-rich mixture needed for reliable cold starts; a worn or seized shaft leads to hard starting, rough idle, and excessive fuel consumption.
- Fuel System Integrity: — As a critical carburetor control component, a correctly seated choke shaft prevents unmetered air ingestion that can cause lean-running conditions and accelerated engine wear.
The choke shaft assembly is the mechanical link between the operator choke control and the choke plate inside the carburetor. When the operator engages the choke, the shaft rotates the choke plate to restrict airflow, enriching the fuel-air mixture and allowing the engine to start reliably in cold conditions. Once the engine warms up, releasing the choke returns the shaft to its open position for normal running. Over time, the shaft can wear at its pivot points, develop play, or seize from debris and corrosion — any of which disrupts choke plate movement and makes consistent starting difficult or impossible. Replacing a worn 5000162083 Choke Shaft Assembly restores precise choke plate control and brings cold-start behavior back to the level expected from your Wacker Neuson plate compactor.
Part Details
| Part Number | 5000162083 |
|---|---|
| Old Part Number | 0162083 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Choke Shaft Assembly |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single Direction Plate | WP1030Aw | 5000630110 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
