The Wacker Neuson Grommet is a genuine OEM component designed for the VP1030A, WP1030A, and BS-series vibratory rammers including the BS50-4As, BS60-4As, BS65-4As, BS68-4As, BS70-4As, BS72-4As, and BS62-4As models. As a direct OEM part sourced through authorized Wacker Neuson supply channels, the meets the same specifications as the original grommet installed at the factory. This grommet sees service across both the VP and WP single-direction vibratory plate family and the BS gasoline vibratory rammer lineup, making it a widely applicable consumable to keep on hand. Confirming your machine's model number against the fitment list before ordering ensures a correct, hassle-free installation.
Key Features
- Genuine OEM Material Integrity — Manufactured to Wacker Neuson's original durometer and compound specification, ensuring the grommet seals, cushions, and isolates exactly as intended for this application.
- Drop-In Installation — Matches the original mounting profile and seat geometry, so the grommet seats fully in its bore without trimming or reshaping.
- Broad Fitment Across Two Equipment Families — Confirmed for VP1030A and WP1030A single-direction vibratory plates as well as BS50-4As, BS60-4As, BS62-4As, BS65-4As, BS68-4As, BS70-4As, and BS72-4As gasoline vibratory rammers.
- Vibration and Contaminant Isolation — A correctly installed grommet prevents metal-to-metal contact and keeps moisture, dust, and debris from migrating through cable or hose pass-throughs, protecting surrounding components.
- Cost-Effective Maintenance Part — Replacing a worn or cracked grommet at the first sign of deterioration protects higher-value components from abrasion and contamination damage.
A grommet is a small but important sealing and protective insert fitted around cables, wires, or hoses where they pass through a panel, housing, or structural opening. Its primary job is to prevent the sharp or rough edge of that opening from chafing through the insulation or sheath of whatever passes through it, and to block the ingress of dirt, water, and debris into enclosed cavities. On vibratory compaction equipment like rammers and plate compactors, grommets are also exposed to sustained vibration, which accelerates wear; a cracked or collapsed grommet can allow abrasive particles to work their way into wiring harnesses or fuel and oil passages, leading to failures that are far more involved to repair than a simple grommet swap.
Part Details
| Part Number | 5000162120 |
|---|---|
| Old Part Number | 0162120 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grommet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single Direction Plate | WP1030Aw | 5000630110 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
