The Wacker Neuson is a genuine OEM Grommet designed for a wide range of Wacker Neuson tandem rollers and vibratory plate compactors, including the RD7Ye, RD7Yeh, RD7Yehf, RD7Yehfb, RD10Yehf, DPU4045Ye, DPU4045Yeh, DPU4045Yehzf, DPU40Yeh, and DPU45Yeh series. Sourced directly from Wacker Neuson, this is a factory-authorized component manufactured to the same standards as the original part installed at the factory. Keeping the correct grommet in place is critical to protecting wiring, cables, or hoses from abrasion and vibration damage — particularly in demanding compaction equipment that operates under constant mechanical stress. Confirm your model number against the fitment list before ordering to ensure a direct match.
Key Features
- Genuine OEM Material Integrity — Manufactured from the same rubber compound spec as the original, maintaining correct flexibility and compression resistance under continuous vibration loads typical of compaction equipment.
- Direct Drop-In Replacement — Matches the original mounting aperture and retention profile exactly, seating securely without trimming or rework during installation.
- Broad Fitment Across Wacker Neuson Compaction Lines — Compatible with RD7Ye and RD10Yehf tandem roller series, as well as DPU4045Ye, DPU4045Yeh, DPU4045Yehzf, DPU40Yeh, and DPU45Yeh vibratory plate compactor variants in both LRC and HRC configurations.
- Protects Cables and Hoses from Vibration Wear — A properly seated grommet prevents chafing at panel or frame pass-throughs; a missing or cracked grommet accelerates wire insulation failure and can lead to shorts or fluid line damage.
- Authorized Part for Wacker Neuson Machines — As a genuine OEM component, this grommet carries the correct Wacker Neuson part number 5000217901 and is the recommended replacement for service and maintenance work.
A grommet is a small but essential sealing and protective insert fitted into a hole or opening in a metal panel or frame where cables, wires, or hoses must pass through. Its primary job is to prevent the sharp edges of the aperture from cutting into or chafing against whatever runs through it — a risk that is significantly amplified in vibratory compaction equipment, where constant mechanical movement places ongoing stress on every component. When a grommet cracks, hardens, or goes missing entirely, cables and hoses are exposed to metal edges and vibration, which can quickly lead to insulation wear, electrical faults, or fluid line abrasion that causes broader machine failures.
Part Details
| Part Number | 5000217901 |
|---|---|
| Old Part Number | 0217901 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grommet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD7Ye Tandem Roller | RD7Ye | 5100027116, 5100027117, 5100038032, 5100048340 |
| DPU45Yeh US | DPU45Yeh US | 5100063121 |
| V.Plate DPU 4045Ye | DPU 4045YE | 5000610181 |
| DPU4045Yeh | DPU4045Yeh | 5100009662 |
| DPU4045Yeh LRC | DPU4045Yeh LRC | 5100063118 |
| DPU4045Yehzf LRC | DPU4045Yehzf LRC | 5100063120 |
| DPU40Yeh US | DPU40Yeh US | 5100063124 |
| DPU40Yeh EU | DPU40Yeh EU | 5100068379 |
| DPU45Yeh EU | DPU45Yeh EU | 5100068380 |
| Vibratory Plate DPU 4045Ye | DPU 4045Ye | 5000610350 |
| RD7Yehf HRC | RD7Yehf HRC | 5100006337, 5100006341 |
| DPU4045YE | DPU4045Ye | 5100016954 |
| RD7Yeh LRC | RD7Yeh LRC | 5100006335 |
| RD7Yeh HRC | RD7Yeh HRC | 5100006336, 5100006467 |
| RD7Yehf LRC | RD7Yehf LRC | 5100006340 |
| RD7Yehfb LRC | RD7Yehfb LRC | 5100006345 |
| RD7Yehfb HRC | RD7Yehfb HRC | 5100006346 |
| Vibrationsplatte | DPU4045Yehzf | 5100022113 |
| DPU4045Yeh EU | DPU4045Yeh EU | 5100063123 |
| RD10Yehf LRC | RD10Yehf LRC | 5100070502 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
