The Wacker Neuson Dowel Pin A8 X 20 is a genuine OEM component designed for a wide range of Wacker Neuson vibratory rammers and single-direction vibratory plate compactors, including the BS50-4As, BS60-4As, BS65-4As, BS70-4As, BS72-4As, and VP1030A series. As a factory-sourced part, the meets the exact dimensional and material standards set by Wacker Neuson, ensuring correct installation without guesswork. This dowel pin is a direct replacement for a broad fitment range spanning multiple rammer and plate compactor variants built for trench compaction and soil preparation applications.
Key Features
- Exact OEM Dimensional Tolerancing — Manufactured to Wacker Neuson's original A8 X 20 specification, ensuring the pin seats correctly in its bore without slop or interference fit issues that can cause misalignment.
- Broad Multi-Model Compatibility — Fits the VP1030A and WP1030A vibratory plate compactor series alongside the BS50-4As, BS60-4As, BS65-4As, BS70-4As, BS72-4As, BS62-4A/AB, and BS68-4A/AB gasoline rammer families.
- Drop-In Replacement — Genuine OEM sourcing means this pin installs directly into existing bores and housings, aligning with mating components as designed on the original assembly line.
- Structural Alignment Under High-Vibration Load — In compaction equipment, dowel pins maintain the precise positional relationship between mating assemblies cycle after cycle; a worn or loose pin allows components to shift and accelerates wear on surrounding parts.
- Genuine Wacker Neuson Part — Sourced directly from Wacker Neuson, part 5000162155 carries the full manufacturer quality backing expected for equipment used in demanding trench and soil compaction work.
A dowel pin is a precision locating fastener used to fix the exact position of two mating components relative to each other. In vibratory compaction equipment like rammers and plate compactors, where high-frequency impact forces are generated continuously, maintaining tight positional accuracy between assembled parts is critical to preventing premature wear and mechanical failure. When a dowel pin becomes worn, bent, or lost, the components it locates can shift slightly with each stroke, leading to accelerated damage to bores, housings, and adjacent hardware — ultimately affecting compaction performance and machine longevity.
Part Details
| Part Number | 5000162155 |
|---|---|
| Old Part Number | 0162155 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Dowel Pin A8 X 20 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single Direction Plate | WP1030Aw | 5000630110 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
