The Wacker Neuson Valve Spring is a genuine OEM component designed for the VP1030A and WP1030A single-direction vibratory plate compactors, as well as the BS50-4As, BS60-4As, BS65-4As, BS68-4A, BS70-4As, and BS72-4As vibratory rammer series. As a direct factory replacement, this spring meets the exact tension and dimensional specifications set during original manufacture. Sourcing a genuine Wacker Neuson ensures the valve train operates exactly as engineered, maintaining consistent engine performance across all compatible machines.
Key Features
- Correct Valve Spring Tension: — Manufactured to OEM tension specifications, ensuring proper valve seating and consistent sealing pressure throughout the engine's operating range.
- Genuine OEM Part: — Sourced directly from Wacker Neuson, this part carries the same material grade and coil geometry as the spring installed at the factory — no guesswork on spring rate or free length.
- Broad Cross-Family Fitment: — Compatible with VP1030A and WP1030A vibratory plate compactors, plus the BS50-4As, BS60-4As, BS65-4As, BS68-4A, BS70-4As, and BS72-4As vibratory rammer lines, covering a wide range of Wacker Neuson compaction equipment.
- Protects Valve Train Integrity: — A correctly tensioned valve spring holds the valve firmly closed during the compression stroke and returns it on time during the exhaust cycle, preventing blow-by, misfires, and accelerated seat wear.
- Drop-In Installation: — Designed to seat and retain exactly as the original, fitting standard valve retainer and keeper configurations on these engines without modification to surrounding components.
The valve spring is a small but critical engine component that holds each engine valve closed against the cylinder head seat when the valve is not being actuated. It must exert consistent, calibrated force: too little tension allows the valve to float at higher RPMs, causing power loss and potential valve contact damage; too much or uneven tension increases wear on the camshaft and valve guides. When a valve spring weakens, cracks, or breaks, the engine may run rough, lose compression, or fail to start entirely — making prompt replacement essential to keeping compaction equipment productive on the job.
Part Details
| Part Number | 5000162172 |
|---|---|
| Old Part Number | 0162172 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Valve Spring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single Direction Plate | WP1030Aw | 5000630110 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
