The Wacker Neuson 5000162274 is a genuine OEM Shockmount Bracket Set (Pair) designed for the BS-series gasoline vibratory rammer lineup, including the BS 50-2, BS 50-2i, BS 60-2, BS 60-2i, BS 65-V, BS 70-2, and BS 70-2i models, as well as the MS52. As a direct Wacker Neuson OEM part, the 5000162274 is manufactured to the same specifications as the original hardware installed at the factory, ensuring a correct, consistent fit across all covered rammer variants including EU-specification machines. This bracket set is sold as a pair, so both mounts are replaced together — maintaining balanced vibration isolation across the upper and lower chassis connection points. Keeping serviceable shockmount brackets in place is essential to rammer performance, operator comfort, and the structural integrity of the machine over time.
Key Features
- Genuine OEM Bracket Construction — Manufactured by Wacker Neuson to the same material grade and dimensional tolerances as the original brackets, ensuring correct load distribution across the shockmount assembly.
- Sold as a Matched Pair — Both brackets are included in a single part number, so left and right (or upper and lower) mounts are always replaced together for consistent vibration isolation.
- Broad BS-Series Compatibility — Fits multiple variants of the BS 50-2, BS 60-2, BS 65-V, BS 70-2, and MS52 rammers, covering standard, "i"-suffix, and EU-specification models across a wide range of serial number ranges.
- Preserves Vibration Damping Performance — Worn or cracked shockmount brackets allow excess vibration to transfer directly into the upper housing; replacing them restores proper isolation and protects adjacent components from fatigue damage.
- Operator Safety Relevance — Functional shockmount brackets directly limit hand-arm vibration transmission to the operator — a factor in compliance with occupational vibration exposure standards on regulated job sites.
The shockmount bracket set serves as the structural interface between the rammer's lower compaction mechanism and its upper handle and engine assembly. These brackets work in conjunction with the rubber shockmount isolators to absorb the intense, repetitive impact forces generated during operation, preventing those forces from traveling through the machine frame and into the operator's hands. When the brackets crack, deform, or lose their mounting integrity, vibration isolation breaks down, placing additional stress on the frame, engine mounts, and handle assembly — and increasing vibration exposure at the grip.
Part Details
| Part Number | 0162274 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shockmount Bracket Set (Pair) |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS 50-2 | BS 50-2 | 0009380, 0009382, 0009384, 0620609, 0620610, 0620733 |
| BS50-2 | BS50-2 | 5000620025, 5000620048 |
| BS50-2 EU | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| BS50-2i | BS50-2i | 5000009473, 5000620026, 0009383, 5200003696 |
| BS 50-2i | BS 50-2i | 0009332, 0009338, 0620611 |
| BS50-2i EU | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| BS 60-2 | BS 60-2 | 0009388, 0009391, 0620612 |
| BS 60-2 EU | BS 60-2 EU | 0009418, 0009421 |
| BS60-2 EU | BS60-2 EU | 5000009417 |
| BS60-2i EU | BS60-2i EU | 5000009419 |
| BS 60-2i | BS 60-2i | 0009339, 0620613, 0620614 |
| BS60-2i | BS60-2i | 5000009393 |
| BS 65-V | BS 65-V | 0009396 |
| BS 70-2 | BS 70-2 | 0009397, 0009399 |
| BS 70-2 EU | BS 70-2 EU | 0009425 |
| BS70-2 EU | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| BS 70-2i | BS 70-2i | 0009341, 0009401 |
| BS70-2i EU | BS70-2i EU | 5000009426, 5000009428 |
| MS52 | MS52 | 5200008222 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
