The Wacker Neuson 5000162645 is a genuine OEM Dipstick Assembly designed for AP, BPS, and VP series vibratory plate compactors. As a direct factory replacement, this assembly delivers an exact fit into the oil check port with no guesswork on calibration or measurement markings. It is compatible with a wide range of battery-powered and single-direction plate compactor models, including the AP 1135A, AP 1550A, BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A, VP1030A, VP1135A, and VP 1135AW, among others. Sourced directly from Wacker Neuson, part number 5000162645 carries the same tolerances and markings as the unit installed at the factory.
Key Features
- Genuine OEM Calibration Markings — Accurate min/max oil level indicators matched to Wacker Neuson engine and exciter specifications, so you always get a true reading.
- Direct Drop-In Replacement — Engineered to thread or seat into the original oil check port without alteration, maintaining a secure seal every time.
- Broad Compactor Compatibility — Fits AP, BPS, and VP series plates across numerous regional and performance variants, covering a large share of the Wacker Neuson single-direction and battery-powered plate compactor lineup.
- Protects Engine and Exciter Life — A correctly functioning dipstick allows operators to catch low-oil conditions before they cause heat buildup, accelerated wear, or seizure in the exciter or engine.
- OEM Material Quality — Produced to Wacker Neuson production standards, ensuring the rod, handle, and seal ring hold up to repeated removal and re-insertion in demanding field conditions.
A dipstick assembly is the primary tool an operator uses to check engine or exciter oil level without draining or disassembling any components. It consists of a graduated rod with clearly marked fill indicators and a handle or cap that seals the oil check tube when not in use. When a dipstick becomes cracked, loses its markings, or no longer seals the tube properly, accurate oil level checks become impossible — increasing the risk of running the machine low on oil and causing premature internal wear. Replacing a damaged or missing dipstick assembly with a correctly calibrated OEM unit restores confidence in routine pre-operation checks and helps keep the compactor running within its designed oil capacity.
Part Details
| Part Number | 0162645 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Dipstick Assembly |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| AP 1135A | AP 1135A | 5000009519 |
| AP 1550A | AP 1550A | 5000009539 |
| AP 1550AW | AP 1550AW | 5000009540 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1030A US | BPS1030A US | 5100080504 |
| BPS1030A EU | BPS1030A EU | 5100084344 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1030Aw US | BPS1030Aw US | 5100080503 |
| BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1135A US | BPS1135A US | 5100080506 |
| BPS1135A EU | BPS1135A EU | 5100084348 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1135Aw US | BPS1135Aw US | 5100080505 |
| BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| BPS1340A | BPS1340A | 5100059906 |
| BPS1340A US | BPS1340A US | 5100080508 |
| BPS1340A EU | BPS1340A EU | 5100084350 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1340Aw US | BPS1340Aw US | 5100080507 |
| BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| BPS1550A | BPS1550A | 5100061215 |
| BPS1550Aw | BPS1550Aw | 5100061216 |
| BPS1550Aws | BPS1550Aws | 5100067727 |
| BPS2050A | BPS2050A | 5100061217 |
| BPS2050Aw | BPS2050Aw | 5100061218 |
| VP1030A | VP1030A | 5100018357 |
| VP1030Aw | VP1030Aw | 5100018356 |
| VP1135A US | VP1135A US | 5100018351, 5100029064 |
| VP 1135AW | VP 1135AW | 0009058 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
