The Wacker Neuson Main Jet #95 is a genuine OEM carburetor main jet designed for a broad range of Wacker Neuson equipment, including the RD12A-90 tandem roller, CT48 concrete trowel series, GP5600A and GP6600A portable generators, GPS5600A generators, GV5600A value generators, BFS 940 and BFS 914 floor saws, and BFS 2020AS and BFS 1318AS walk-behind saws. Sourced directly from Wacker Neuson, part is manufactured to the exact orifice size specification required to maintain correct fuel metering through the carburetor. This genuine OEM component ensures the engine receives the precise fuel-to-air ratio your equipment was engineered to run on, protecting performance across all listed models.
Key Features
- Calibrated #95 Orifice Size — Precisely sized fuel passage delivers the correct fuel flow rate for proper air-fuel mixture and consistent engine output.
- Genuine OEM Quality — Manufactured to Wacker Neuson's exact material and dimensional tolerances, ensuring the jet seats and seals correctly within the carburetor body without modification.
- Broad Cross-Model Fitment — Compatible with the RD12A-90 tandem roller, CT48 trowel series, GP5600A, GP5600, GP6600A, GPS5600A, GV5600A portable generators, BFS 940, BFS 914, BFS 2020AS, and BFS 1318AS floor saws.
- Protects Engine Fuel Delivery — A worn or clogged main jet causes lean running, rough idle, loss of power, and potential engine damage; replacing it with the correct #95 jet restores full fuel delivery and throttle response.
- Direct Carburetor Drop-In — Threaded to match the OEM carburetor jet port, allowing straightforward installation during carburetor cleaning or rebuild service.
The main jet is a small but critical component inside the carburetor responsible for metering the amount of fuel delivered to the engine under load. It contains a precisely drilled orifice — in this case sized at #95 — that controls fuel flow in proportion to engine demand. When the main jet becomes clogged with varnish deposits or debris, the engine runs lean, losing power and risking overheating or damage; when it wears or is replaced with an incorrectly sized jet, the fuel mixture is thrown off, causing poor throttle response and excessive fuel consumption. Using the correct OEM-specified jet, such as Wacker Neuson 5000162702, ensures your engine operates within its designed parameters across the full throttle range.
Part Details
| Part Number | 5000162702 |
|---|---|
| Old Part Number | 0162702 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Main Jet #95 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD12A-90 ROLLER,DBL DRUM,GRN | RD12A-90 | 5000620369, 5000620058, 5000620320 |
| CT48-11A Trowel | CT48-11A | 5000009450, 5000620835 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| G 7AI | G7AI | 5000009104 |
| Premium Portable Generator | GP5600A | 5000620094, 5000620095, 5000620381, 5000620382, 5000620326, 5000620327, 5000620984, 5000620979, 5000620980, 5000620042, 5000620043, 5000620091, 5000620092, 5000620011, 5000620012, 5100041979 |
| GPS5600A,CAN GFI | GPS5600A | 5000620096, 5000620383, 5000620328, 5000620981, 5000620982, 5000620044, 5000620093, 5000620013 |
| GP6600A GENERATOR,CAN GFI | GP6600A | 5000620100, 5000620101, 5000620384, 5100042220 |
| Premium Portable Generator | GP6600 | 5000620385, 5000620989, 5000620990, 5000620985, 5000620986 |
| BFS 2020AS SAW | BFS 2020AS | 5000620086 |
| Self-propelled Walk-behind Saw | BFS 1318AS | 5000620085 |
| GS12Ai | GS12AI | 5000620317 |
| GPS6600A Generator, EPA | GPS6600 | 5000620987 |
| GP5600A Generator, EPA w/Wheel Kit | GP5600 | 5000620983 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Value Generator | GV5600A | 5000620410, 5000620288, 5000620335 |
| Value Portable Generator | GV5600 | 5000620995 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| BFS940 | BFS940 | 5100029229 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
