The Wacker Neuson is a genuine OEM set of Oversize Piston Rings 0.50mm designed for a broad range of Wacker Neuson equipment including VP and WP series single-direction vibratory plate compactors, PT2 trash pumps, CT36-6 concrete trowels, BFS floor saws, and GPi3200 and GPSi3200 portable inverter generators. As a direct factory replacement, is manufactured to the same dimensional and material specifications as the original rings installed at the factory, ensuring a correct fit in the bore after a 0.50mm oversize rebore. This is the part to specify during engine reconditioning whenever the cylinder bore has been honed or machined to the first oversize, restoring compression and oil control to like-new condition across all applicable models.
Key Features
- Oversize Bore Compatibility: — Ground to 0.50mm over standard diameter, these rings are sized specifically for cylinders that have been rebored to the first oversize — they will not fit a standard bore.
- Genuine OEM Specification: — Manufactured by Wacker Neuson as a factory original part, matching the original ring width, gap tolerance, and ring-face coating for correct sealing pressure against the cylinder wall.
- Wide Cross-Model Fitment: — Confirmed for VP and WP vibratory plate compactors, PT2 trash pumps, CT36-6 trowels, BFS floor saws, and GPi3200/GPSi3200 generators — one part number covering a broad engine family.
- Compression and Oil Control Restored: — Worn or broken piston rings cause blow-by, oil consumption, hard starting, and loss of power; correctly sized oversize rings restore cylinder seal and return the engine to full output.
- Engine Rebuild Confidence: — Using the correct OEM oversize ring set during a top-end rebuild ensures the ring-to-wall clearance stays within the engine manufacturer's specification, protecting the investment in the rebore.
Piston rings seal the combustion chamber between the piston and the cylinder wall, maintaining the compression pressure needed for efficient combustion while also controlling how much oil reaches the combustion chamber. A correctly functioning ring pack keeps blow-by gases out of the crankcase, holds oil consumption to a minimum, and allows the engine to develop its rated power. When rings wear, stick, or break, compression drops, oil burns off, and the engine may smoke heavily, run rough, or fail to start. Oversize rings like the Wacker Neuson 5000164789 are fitted during engine reconditioning after the cylinder bore has been machined to remove wear and restore a true, round surface — the extra 0.50mm of material compensates for the metal removed during that process.
Part Details
| Part Number | 5000164789 |
|---|---|
| Old Part Number | 0164789 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Oversize Piston Rings 0.50mm |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Single Direction Plate | VPR70 | 5000006909 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| Portable Inverter Generator | GPi3200 | 5000620779, 5000620960, 5000620781 |
| Portable Inverter Generator | GPSi3200 | 5000620780, 5000620961, 5000620936 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
