The Wacker Neuson Adjuster Bracket is a genuine OEM component designed for the CRT36, CRT48, and CRT60 series ride-on concrete power trowels. Sourced directly from Wacker Neuson, this bracket delivers the exact tolerances and geometry required to maintain proper pitch adjustment on your trowel's rotor arms. It is a direct-fit replacement for a wide range of CRT models including the CRT36-24A, CRT36-25, CRT36-26A, CRT48-33K, CRT48-34V, CRT48-35L, CRT48-35V, CRT48-37V, CRT48-57K, CRT60-66K, and CRT60-74L, as well as dual-fuel and EU variants. As a genuine Wacker Neuson part, the is manufactured to the same standards as the original, so you can restore your trowel's finishing performance with confidence.
Key Features
- Genuine OEM Construction: — Manufactured to Wacker Neuson's original dimensional and material specifications, ensuring correct bracket geometry for consistent pitch adjustment across the rotor assembly.
- Broad CRT Series Coverage: — Fits CRT36, CRT48, and CRT60 model families, including gasoline, diesel, dual-fuel, and EU variants, across multiple production generations.
- Drop-In Replacement: — Matches the original mounting profile and fastener pattern, allowing straightforward installation without reworking surrounding hardware.
- Maintains Rotor Pitch Control: — A correctly functioning adjuster bracket holds the pitch mechanism in calibration, allowing the operator to dial in blade angle for finish quality. A worn or cracked bracket causes inconsistent pitch, leading to uneven concrete finishing.
- Verified Part Number: — Part number 5000165594 is the authorized Wacker Neuson reference for this bracket across all listed CRT variants, giving you confidence you are ordering the correct component before the machine ever goes down.
The adjuster bracket is a structural link in the trowel's blade pitch control system. It connects the pitch adjustment mechanism to the rotor arm assembly, holding the selected blade angle under the dynamic load of finishing operation. When the bracket is intact and properly seated, the operator retains precise control over blade pitch throughout the finishing pass. If the bracket cracks, bends, or wears at its pivot points, blade angle becomes inconsistent across the rotor, producing surface irregularities and forcing the operator to slow down or stop finishing until the component is replaced.
Part Details
| Part Number | 5000165594 |
|---|---|
| Old Part Number | 0165594 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Adjuster Bracket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CRT48-35L Trowel | CRT48-35L | 5000620113, 5000620806 |
| CRT48-35V | CRT48-35V | 5000620112 |
| CRT48-35V | CRT48-35V EU | 5000620807 |
| 915mm/36in Ride-on Trowel | CRT36-25 | 5000620115, 5000620295, 5000620803, 5000620804 |
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| 1220mm/48in Ride-on Trowel | CRT48-31V | 5000620476 |
| 915mm/36in Ride-On Trowel | CRT36-24A | 5000620080, 5000620299, 5000620801, 5000620802 |
| CRT36-26A Trowel w/Wheel Kit | CRT36-26A | 5000621000, 5000620999, 5000621001, 5000621002 |
| CRT48-33K | CRT48-33K | 5200002353 |
| CRT48-33K Trowel, Dual-Fuel | CRT48-33K DF | 5200007686, 5200007687 |
| CRT60-66K | CRT60-66K | 5000620921, 5000620922 |
| CRT48-33K | CRT48-33k | 5200002354 |
| CRTv 36-26A Trowel, w/Wheel Kit | CRTv36-26A | 5200008544, 5200008545, 5200008546 |
| CRT48-37V Trowel | CRT48-37V | 5100024209 |
| CRT48-57K Trowel | CRT48-57K-MS | 5100018892 |
| CRT60-74LX | CRT60-74LX | 5100038000 |
| CRT48-37V | CRT48-37V EU | 5100024290 |
| CRT60-74L | CRT60-74L | 5200012300 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
