Wacker Neuson 5000172326 Washer 8.4 Flat 200Hv
Wacker Neuson

Wacker Neuson 5000172326 Washer 8.4 Flat 200Hv

$1.71
(No reviews yet) Write a Review
SKU:
5000172326-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Washer 8.4 Flat 200Hv is a genuine OEM flat washer designed for the BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, and BS70-2 series vibratory rammers, as well as the RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, and RTKx-SC3 remote-controlled trench rollers. Sourced directly from Wacker Neuson, part meets the same material and dimensional standards as the original component installed at the factory. The 200Hv hardness rating confirms this washer is engineered to withstand the high-vibration and high-load environments found in both rammer and trench roller applications. Verify your machine's model number against the fitment list to confirm compatibility before ordering.

Key Features

  • Genuine OEM Hardness Rating: — Manufactured to a 200Hv hardness specification, giving this flat washer the load-bearing capacity needed to resist deformation under sustained vibration and compaction forces.
  • Drop-In Replacement: — At 8.4 mm, the bore and outer dimensions match the original Wacker Neuson specification exactly, allowing straightforward installation without machining or shimming.
  • Broad Fitment Across Two Machine Families: — Confirmed for BS-series gasoline vibratory rammers (BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, BS70-2i) and RT/RTL/RTK remote-controlled trench rollers (RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, RTKx-SC3).
  • Vibration-Resistant Clamping: — A correctly rated hardened flat washer distributes bolt-load evenly across mating surfaces, preventing fastener loosening and surface damage in high-cycle compaction equipment.
  • Authentic Wacker Neuson Part: — Supplied as a genuine OEM component under part number 5000172326, ensuring material composition and dimensional tolerances align with Wacker Neuson engineering requirements.

A flat washer serves as a load-distributing interface between a fastener — bolt head or nut — and the mating surface it clamps. In vibratory compaction equipment such as rammers and trench rollers, fasteners are subjected to continuous cyclic stress that can cause them to work loose or cut into softer substrate materials over time. A hardened flat washer rated to 200Hv spreads the clamping force across a wider area, protecting the joint and helping maintain proper torque retention through thousands of compaction cycles. When a washer wears, deforms, or goes missing, the fastener assembly loses its ability to maintain consistent clamp load, which can lead to loosened components, accelerated wear on mating surfaces, and potential structural issues in critical joints.

Part Details

Part Number5000172326
Old Part Number0172326
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionWasher 8.4 Flat 200Hv

Compatibility & Fitment

Name Model Machine Number
BS50-2i BS50-2i 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037
250mm/10in Shoe, Vibratory Ram mer BS50-2 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647
BS60-2i BS60-2i 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038
Oil-injected Rammer with 250mm /10in Shoe BS50-2i EU 5000009412, 5000009414, 5000009416
330mm/13in Shoe, Oil-injected Rammer BS70-2i 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653
Vibratory Rammer with 280mm/11 in Shoe BS50-2 EU 5000009410, 5000009411, 5000009413
Oil-injected Rammer with 280mm /11in Shoe BS60-2i EU 5000009419, 5000009420
Vibratory Rammer with 280mm/11 in Shoe BS60-2 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666
Vibratory Rammer with 280mm/11 in Shoe BS60-2 EU 5000009417, 5000009421, 5000009418
Oil-injected Rammer with 330mm /13in Shoe BS70-2i EU 5000009426, 5000009428
Vibratory Rammer with 280mm/11 in Shoe BS70-2 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676
Variable Speed Rammer with 280 mm/11in Shoe BS65-V EU 5000009423
Vibratory Rammer with 280mm/11 in Shoe BS70-2 EU 5000009424, 5000009425, 5000009427
Vibratory Trench Roller RT82-SC2 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527
Vibratory Trench Roller RT82-SC2 EU 5000620845, 5200003107
Vibratory Trench Roller RT56-SC2 5000620294, 5000620368
Vibratory Trench Roller RT56-SC2 EU 5000620844
Vibratory Trench Roller RT82-SC 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482
Vibratory Trench Roller RT56-SC 5000009026, 5000620366
RTLx-SC3 TRENCH ROLLER,GRN RTLx-SC3 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269
RTL82-SC3 ROLLER,SMOOTH DRUM RTL82-SC3 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541
RTKx-SC3 Trench Roller RTK82-SC3 5200019257, 5200019256, 5200019255
RTKx-SC3 TRENCH ROLLER,GRN RTKx-SC3 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337
280/11in Shoe, Vibratory Ramme r MS62 5200004690
280/11in Shoe, Vibratory Ramme r MS52 5200008222
Trench Roller RTx-SC2 EU 5100028378, 5200008540, 5100052330
RTx-SC2 TRENCH ROLLER RTx-SC2 5200008538, 5200008539, 5200018044, 5200018329
2-stroke rammer BS65V, 280 mm shoe BS65-V 5200000669, 5000009396, 5100016651
Vibratory Rammer BS60Y 5000006779, 5000007509
Vibratory Rammer with 250mm/10 in Shoe BS45Y 5000007137

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.