The Wacker Neuson is a genuine OEM Press In Stud designed for the G100, G120, G150, G180, G230, G240, and G625 mobile generator series. As a factory-sourced component, it is manufactured to the same specifications as the original part installed at the factory, ensuring a correct, interference-fit installation without modification. This stud services an exceptionally wide range of configurations across the GP generator lineup, including standard, cold weather, custom, Tier 3, Tier 4, and Tier 4 Final variants, as well as MGT3.1S and MGT4 trailer-mounted generator systems. Keeping the correct Press In Stud on hand means a straightforward like-for-like swap when service calls for it.
Key Features
- Genuine OEM Material Integrity — Manufactured to the exact hardness and dimensional tolerances required for a secure press-fit retention — no loosening, spinning, or pull-out under load.
- Direct Press-In Installation — Engineered to seat flush into the original bore, delivering the same interference fit as the factory-installed stud with no rework to surrounding hardware.
- Broad Generator Family Coverage — Confirmed fitment across the G100, G120, G150, G180, G230, G240, and G625 generator models, spanning Tier 3, Tier 4, and Tier 4 Final emission configurations, plus MGT3.1S and MGT4 trailer systems.
- Structural Fastening Reliability — A correctly seated press-in stud maintains the clamping load and panel alignment it anchors; a failed or missing stud allows movement that can damage mating components over time.
- Verified OEM Part Number — Part number 5000175973 is the factory-assigned reference, confirming you are sourcing the correct stud for your specific generator configuration.
A press-in stud is a headless fastener that is permanently installed into a base material — typically sheet metal or a housing panel — by pressing it into a pre-drilled hole under controlled force, where it locks in place through an interference fit. Once seated, it provides a fixed threaded or unthreaded post that mating components, covers, or brackets can be secured to. On portable generators like the Wacker Neuson G-series, press-in studs are used throughout the enclosure and structural assembly to create reliable fastening points without requiring access to the back side of a panel. When a stud shears, loosens, or pulls free, the panel or component it supports can no longer be properly fastened, which may lead to vibration damage, misalignment, or an open enclosure that exposes internal components to the elements.
Part Details
| Part Number | 5000175973 |
|---|---|
| Old Part Number | 0175973 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Press In Stud |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5200001321, 5200006902, 5000620656, 5000620306, 5000620655, 5200003160, 5000620889, 5000620307, 5200007860, 5000620308, 5000620887, 5000620888, 5200014784, 5200010135, 5200010136, 5200010137, 5200025554, 5100026980, 5100026981, 5100026982, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5200001322, 5200006903, 5000620303, 5000620658, 5000620659, 5200003161, 5000620886, 5000620884, 5200007861, 5000620304, 5000620885, 5000620305, 5200010140, 5200014470, 5200010138, 5200010139, 5200014471, 5100015615, 5200014469, 5200025555, 5100045089, 5100045575, 5100045576, 5100045590, 5100045591, 5100045592, 5100049844, 5100049845, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5200001323, 5200006904, 5000620662, 5000620300, 5000620661, 5200003162, 5000620301, 5000620302, 5200025556, 5100025834 |
| Mobile Generators | G100 | 5200001319, 5200006900, 5200008348 |
| Mobile Generators | G120 | 5200001320, 5200006901, 5200008353 |
| G230 Generator, Custom T4i | G230 | 5000620883, 5000620881, 5000620882, 5200007862, 5200010141, 5200010142, 5200010143, 5100015614, 5100045190, 5100045596, 5100045597, 5100049846, 5100049847 |
| G150 Generator,Hertz,T4 Final | G150 Generator,Hertz,T4 Final | 5100015616 |
| MGT4S Trailer, Surge, Dual Axle, 6000LB Each | MGT4S | 5000620315, 5200001327 |
| MGT4E Trailer, Electric, Dual Axle, 6000LB Each | MGT4E | 5000620316 |
| G625 Generator, Standard T2 | G625 | 5100013899 |
| MGT3.1S Trailer, Surge, Dual Axle, 5200LB Each | MGT3.1S | 5200001326 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
