Wacker Neuson 5000176413 Ring Terminal #8/.38 Hole Insulated
Wacker Neuson

Wacker Neuson 5000176413 Ring Terminal #8/.38 Hole Insulated

$1.47
(No reviews yet) Write a Review
SKU:
5000176413-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Ring Terminal #8/.38 Hole Insulated is a genuine OEM electrical terminal designed for the G-Series portable generator lineup, including G70, G100, G120, G150, G180, and G240 models. As a direct OEM replacement, this terminal is sourced and specified to the same standards as the original component installed at the factory. The fits across a wide range of G-Series configurations — standard, cold weather, skid-mounted, extended run, and Tier 3 variants — making it a versatile stocking part for fleets running multiple generator models. Verify your machine number against the fitment list to confirm compatibility before ordering.

Key Features

  • Correct Conductor and Hole Sizing — Specified for a #8 conductor with a .38-inch mounting hole, ensuring correct contact area and secure lug attachment at the terminal point.
  • Insulated Construction — The insulated sleeve prevents accidental short circuits and protects the connection from moisture and abrasion in demanding generator enclosure environments.
  • Genuine OEM Part — Sourced directly from Wacker Neuson, this terminal meets the original electrical specification for the G-Series generator wiring harness — no guesswork on gauge rating or plating material.
  • Broad G-Series Compatibility — Fits G70, G100, G120, G150, G180, and G240 generators across standard, cold weather, skid-mounted, extended run, and Tier 3 configurations.
  • Electrical Safety Critical — A correctly crimped and rated ring terminal maintains a low-resistance, mechanically secure connection; a failed or undersized terminal can cause voltage drop, overheating, or intermittent power faults in the generator output circuit.

A ring terminal is a small but electrically critical connector used to attach a wire to a threaded stud or screw within the generator's wiring system. The circular lug slides over the stud and is secured with a fastener, creating a stable, vibration-resistant electrical bond. The insulated version adds a protective sleeve over the barrel to isolate the crimped joint from adjacent conductors and the enclosure frame. When a ring terminal corrodes, cracks, or loses its crimp, the connection can develop resistance, leading to heat buildup, voltage irregularities, or a complete loss of continuity in that circuit — all of which can affect generator output reliability and trigger electrical faults.

Part Details

Part Number5000176413
Old Part Number0176413
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionRing Terminal #8/.38 Hole Insulated

Compatibility & Fitment

Name Model Machine Number
Skid-mounted Mobile Generator, Custom G70 5000620352, 5000620351, 5000620648, 5000620647, 5000620711, 5000620646, 5200001318, 5200003220, 5200014464, 5200014465, 5200008344, 5200008342, 5200008343, 5200008339, 5200008341, 5200008340, 5100025814, 5100025838
G100-GENERATOR, SKID, CUSTOM, DEERE T3 G100 5000620651, 5000620650, 5200001319, 5200003158, 5200006900, 5000620313, 5000620314, 5200008348, 5200008346, 5200008347, 5100025816, 5100026958, 5100026959, 5100029211
G120-GENERATOR, SKID, CUSTOM, DEERE T3 G120 5000620654, 5000620653, 5200001320, 5200006901, 5200003159, 5200014467, 5200014468, 5000620311, 5000620310, 5200008353, 5200008350, 5200008351, 5100025818, 5100025840
G150-GENERATOR, SKID, CUSTOM, DEERE T3 G150 5000620657, 5200001321, 5200006902, 5000620656, 5200003160, 5000620307, 5000620308, 5200025554, 5100026981, 5100026982, 5100025830
G180-GENERATOR, SKID, CUSTOM, DEERE T3 G180 5000620660, 5200001322, 5200006903, 5000620659, 5200003161, 5000620304, 5000620305, 5200014470, 5200014471, 5200025555, 5100025832, 5100025842
G240-GENERATOR, SKID, CUSTOM, DEERE T3 G240 5000620663, 5200001323, 5200006904, 5000620662, 5200003162, 5000620301, 5000620302, 5200025556, 5100025834

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.