The Wacker Neuson Ballast Cover Right Gasket is a genuine OEM component designed for the LTN6C, LTN6L, LTN6K, and LTN8K series light towers. Sourced directly from Wacker Neuson, this gasket delivers an exact material and dimensional match to the original part it replaces. It fits across a wide range of LTN6 and LTN8 configurations including standard, racked, cold weather, Tier 4 Final, and V-series variants. When your light tower needs this seal replaced, part number is the correct OEM solution.
Key Features
- Genuine OEM Sealing Material — Manufactured to Wacker Neuson's original material specification, ensuring the gasket compresses and seals at the ballast cover interface exactly as intended.
- Drop-In Right-Side Fitment — Configured specifically for the right-hand ballast cover position; installs directly against the mating surface without trimming or modification.
- Broad LTN6 and LTN8 Series Coverage — Compatible with LTN6C, LTN6L, LTN6K, LTN6LE, LTN8K, and their V-series and S-series derivatives across 50 Hz and 60 Hz builds.
- Maintains Weathertight Protection — A properly seated ballast cover gasket keeps moisture, dust, and debris out of the ballast enclosure, protecting internal electrical components during outdoor operation.
- Electrical Safety Relevance — The ballast cover houses high-voltage lamp ignition components; an intact gasket is an important barrier against environmental ingress that could cause electrical faults or arc hazards.
The ballast cover gasket forms a compression seal between the ballast cover panel and the light tower's lamp head enclosure. Its job is to prevent water, dust, and contaminants from entering the ballast compartment, which houses the high-voltage ignition and ballast components that power the work lights. When this gasket deteriorates, shrinks, or tears, the seal fails and moisture can reach live electrical components, creating a risk of corrosion, short circuits, or premature ballast failure. Replacing a worn gasket promptly is a low-cost step that protects the significantly more expensive ballast assembly inside.
Part Details
| Part Number | 5000177663 |
|---|---|
| Old Part Number | 0177663 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Ballast Cover Right Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| LTN6C, CATERPILLAR | LTN6C | 5000620118, 5000620551, 5000620728, 5000620555, 5200004091, 5200022157 |
| LTN6C-P LIGHT TOWER,60 HZ | LTN6C-P | 5000620298 |
| LTN6L, KOHLER (LOMBARDINI) | LTN6L | 5000620117, 5000620121, 5000620727, 5000620550, 5000620552, 5000620119, 5000620120, 5000620553, 5200004090, 5200004768, 5200012438, 5200022990, 5200017094, 5200017095, 5200022155, 5100027056 |
| LTN6L-P LIGHT TOWER,60 HZ | LTN6L-P | 5000620297 |
| LTN6K Light Tower | LTN6K | 5000620734, 5200022156, 5200022147 |
| LTN8K, KUBOTA | LTN8K | 5000620893, 5000620939 |
| LTN6L 50 Hz Non CE. Custom | LTC6L | 5000620559 |
| LTN6K LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-LT | 5000620938, 5200004092, 5200004769 |
| LTN6K-V S, KUBOTA, 120/240V | LTN6K-V S | 5200018537, 5200018550, 5200018553, 5200023197 |
| LTN8K-V LIGHT TOWER,60HZ | LTN8K-V | 5200002727, 5200002728 |
| LTN6L-V LIGHT TOWER,50HZ | LTN6L-V | 5200002720, 5200002721, 5200002716, 5200002717, 5200002718, 5200002719, 5200017102, 5200019283 |
| LTN6K-V LIGHT TOWER,60HZ | LTN6K-V | 5200002722, 5200002726 |
| LTN8K LIGHT TOWER, COLD WEATHER, Tier 4F | LTN8K-LT | 5200004093 |
| LTN6L-V S, KOHLER (LOMBARDINI) | LTN6L-V S | 5200018536, 5200018539, 5200018573, 5200018552, 5200023687, 5200023688, 5200023689, 5200018576 |
| LTN8K-V S, KUBOTA, 120/240V | LTN8K-V S | 5200018538, 5200018551, 5200018554, 5200023198 |
| LTN6LE-V 50 Hz CE 230 V LED | LTN6LE-V | 5200019285, 5200019140 |
| LTN6L 50 Hz CE- RACKED | LTN6LE | 5200019142, 5200019143, 5200019141 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
