The Wacker Neuson Strain Relief Connector 90 Degree is a genuine OEM component designed for the LTW6K, LTW8K, LTW20Z-1, and LTW20Z-3 series light towers. As a direct OEM replacement, it meets the original design and material specifications Wacker Neuson established for these machines. This connector fits across a wide range of LTW configurations including Standard T4, Tier 4i, Cold Weather, Custom, and V-series variants. Confirm your machine number against the fitment list to ensure you are ordering the correct part for your specific unit.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original material and dimensional specifications, ensuring the connector body and relief angle match the installed wiring harness geometry exactly.
- 90-Degree Relief Angle — The right-angle profile routes cables cleanly away from the connection point, preventing sharp bends that accelerate insulation wear and conductor fatigue.
- Broad LTW Series Coverage — Compatible with LTW6K, LTW8K, LTW20Z-1, and LTW20Z-3 light towers across Standard T4, Tier 4i, Cold Weather, Custom, and V-series configurations.
- Protects Electrical Connections Under Vibration — Light towers operate continuously in demanding outdoor environments; a properly fitted strain relief absorbs cable movement and vibration, protecting the termination point from loosening or damage.
- Electrical Safety Compliance — Strain relief connectors are a required element of safe wiring practice on portable power equipment; using the correct OEM part maintains the integrity of the original wiring design and reduces the risk of exposed conductors.
A strain relief connector is a mechanical fitting that clamps around a cable where it enters an enclosure or junction point, transferring pull and flex loads to the connector body rather than to the electrical termination inside. On light towers like the LTW series, cables are subject to repeated movement during setup, transport, and operation, and a properly rated strain relief prevents that movement from stressing the wire connections themselves. When a strain relief cracks, loosens, or is missing entirely, cables can flex freely at the entry point, eventually causing insulation damage, intermittent faults, or a failed connection that takes the light circuit offline.
Part Details
| Part Number | 5000178300 |
|---|---|
| Old Part Number | 0178300 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Strain Relief Connector 90 Degree |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| LTW20Z-1, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i | LTW20Z1 | 5000620842, 5000620375, 5200004205, 5200004096, 5100051572, 5100051571, 5200014324, 5200014326, 5200018239, 5200023191, 5200024872, 5200014328 |
| LTW6K Light Tower, Standard T4 | LTW6K | 5000620372, 5000620840, 5200004094, 5200024870 |
| LTW8K Light Tower, Standard T4 | LTW8K | 5000620374, 5000620841, 5200004204, 5200004095, 5200023190, 5200024871 |
| LTW20Z-3, LIGHT TOWER 60HZ, ISUZU TIER 4i | LTW20Z3 | 5000620376, 5000620843, 5200003583, 5200004097, 5200014325, 5200014327, 5200023192, 5200023604, 5200014329 |
| LTW20Z3-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z3-V S | 5200018566, 5200018558, 5200018562, 5200023196, 5100022126 |
| LTW20Z1-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z1-V S | 5200018565, 5200018557, 5200018561, 5200024875, 5200023195, 5100022125 |
| LTW6K-V S Light Tower, Cold Weather T4 | LTW6K-V S | 5200018563, 5200018555, 5200018559, 5200024873 |
| LTW8K-V S Light Tower, Cold Weather T4 | LTW8K-V S | 5200018564, 5200018556, 5200023194, 5200018560, 5200024874, 5100022084 |
| Light Tower | LTW20Z3-V | 5200012881, 5200012885, 5200012867, 5200022694 |
| Light Tower | LTW6K-V | 5200012864, 5200012868, 5200012882 |
| Light Tower | LTW8K-V | 5200012869, 5200012883, 5200012865 |
| Light Tower | LTW20Z1-V | 5200012880, 5200012884, 5200012866 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
