The Wacker Neuson is a genuine OEM Tube Clamp, 5/8 ID designed for the LTN and LTW series light towers, including LTN6C, LTN6K, LTN8K, LTW6K, LTW8K, and LTW20Z family models across multiple configurations. As a genuine Wacker Neuson part, the is sourced directly from the manufacturer to confirm correct material spec, inside diameter tolerance, and fitment for the specific tubing runs used in these light tower builds. This clamp covers an extensive range of LTN and LTW configurations spanning standard, cold weather, Tier 4F, Tier 4i, and custom variants. Keeping the correct clamp in place protects fluid and air line integrity throughout the light tower's operating life.
Key Features
- Correct 5/8 ID Tolerance — Sized to the exact inside diameter used in Wacker Neuson LTN and LTW light tower tubing circuits, preventing slippage or over-clamping that can damage hose and line connections.
- Genuine OEM Part — Manufactured to Wacker Neuson's own material and dimensional standards, so the clamp seats and seals the same way as the original installed unit.
- Broad LTN and LTW Series Coverage — Fits LTN6C, LTN6K, LTN8K, LTW6K, LTW8K, and LTW20Z1/Z3 light towers across standard, cold weather, Tier 4F, Tier 4i, and custom configurations.
- Drops In on Existing Tubing — Replaces the original clamp position-for-position, requiring no modification to adjacent lines, fittings, or mounts.
- Protects Against Fluid or Air Line Failure — A failed or incorrectly sized clamp allows lines to loosen under vibration and engine heat, risking leaks and unplanned light tower shutdowns on the jobsite.
A tube clamp secures flexible hose or rigid tubing to a fitting, barb, or chassis mount, preventing movement caused by vibration, pressure pulses, or thermal cycling. In a light tower, tube clamps are used throughout coolant, fuel, and air induction circuits — anywhere a line must be held firmly against a connection point. When a clamp corrodes, loses tension, or is the wrong inside diameter for the tubing it holds, the line can work loose and cause a leak or an air gap that affects engine cooling or fuel delivery, taking the light tower out of service until the connection is reseated and properly secured.
Part Details
| Part Number | 5000178659 |
|---|---|
| Old Part Number | 0178659 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Tube Clamp, 5/8 ID |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| LTN6C, CATERPILLAR | LTN6C | 5000620118, 5000620551, 5000620728, 5000620555, 5200004091, 5200022157 |
| LTN6C-P LIGHT TOWER,60 HZ | LTN6C-P | 5000620298 |
| LTW20Z-1, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i | LTW20Z1 | 5000620842, 5200004205, 5200004096, 5100051572, 5100051571, 5200014326, 5200018239, 5200023191, 5200024872, 5200014328 |
| LTW20Z-3, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i | LTW20Z3 | 5000620843, 5200003583, 5200004097, 5200014327, 5200023192, 5200023604, 5200014329 |
| LTW6K Light Tower, Custom T4 | LTW6K | 5000620840, 5200004094, 5200024870 |
| LTW8K Light Tower, Custom T4 | LTW8K | 5000620841, 5200004204, 5200004095, 5200023190, 5200024871 |
| LTN6K Light Tower | LTN6K | 5000620734, 5200022156, 5200022147 |
| LTN8K LIGHT TOWER, CUSTOM, Tier 4F | LTN8K | 5000620939 |
| LTN6K LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-LT | 5000620938, 5200004092, 5200004769 |
| LTN8K LIGHT TOWER, COLD WEATHER, Tier 4F | LTN8K-LT | 5200004093 |
| Light Tower | LTW20Z3-V | 5200012881, 5200012885, 5200022694 |
| LTW20Z1-V S LIGHT TOWER,CUSTOM, TIER 4i | LTW20Z1-V S | 5200018561 |
| LTW20Z3-V S LIGHT TOWER,CUSTOM, TIER 4i | LTW20Z3-V S | 5200018562 |
| Light Tower | LTW6K-V | 5200012868, 5200012882 |
| Light Tower | LTW8K-V | 5200012869, 5200012883 |
| Light Tower | LTW20Z1-V | 5200012880, 5200012884 |
| LTW6K-V S Light Tower, Custom T4 | LTW6K-V S | 5200018559 |
| LTW8K-V S Light Tower, Custom T4 | LTW8K-V S | 5200018560 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
