Wacker Neuson 5000178882 Rcpt Terminal 22-18 .187 Ins
Wacker Neuson

Wacker Neuson 5000178882 Rcpt Terminal 22-18 .187 Ins

$1.25
(No reviews yet) Write a Review
SKU:
5000178882-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Rcpt Terminal 22-18.187 Ins is a genuine OEM electrical connector terminal designed for the LTW series light towers, including the LTW6K, LTW8K, LTW20Z-1, and LTW20Z-3 model families. As a direct OEM replacement, is manufactured to the same specifications as the original component installed at the factory, ensuring a correct and secure connection in the wiring harness. This terminal is compatible across a wide range of LTW configurations, including Standard T4, Cold Weather, Custom, and Tier 4i variants. When you need an exact-fit terminal to restore a reliable electrical connection in your light tower, this is the part to order.

Key Features

  • Correct Gauge and Tab Sizing — Rated for 22–18 AWG wire with a .187-inch insulated tab, matching the original crimp and connector specification used throughout the LTW wiring harness.
  • Genuine OEM Electrical Integrity — Manufactured to Wacker Neuson's original contact resistance and retention force specs, so the terminal maintains a stable, low-resistance connection under vibration and load cycling.
  • Drop-In Harness Replacement — Installs directly into the existing connector housing without modification, preserving the original wire routing and plug integrity.
  • Broad LTW Series Compatibility — Fits LTW6K, LTW8K, LTW20Z-1, and LTW20Z-3 light towers across Standard T4, Cold Weather, Custom, and Tier 4i configurations.
  • Protects Downstream Electrical Components — A properly seated terminal prevents arcing, voltage drop, and intermittent faults that can damage control boards, solenoids, or lighting circuits.

A receptacle terminal is a small but critical element in any wiring harness — it forms the mechanical and electrical bridge between individual wire leads and their mating connector housings. On Wacker Neuson LTW light towers, these terminals carry control and power signals throughout the machine, from engine controls to lighting circuits and safety interlocks. When a terminal corrodes, loosens, or deforms, the result is intermittent signal loss, voltage drop, or a complete open circuit — any of which can shut down tower operation or cause unpredictable electrical behavior. Replacing a damaged terminal with the correct OEM-spec part restores a solid, low-resistance connection and brings the circuit back to its original designed performance.

Part Details

Part Number5000178882
Old Part Number0178882
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionRcpt Terminal 22-18 .187 Ins

Compatibility & Fitment

Name Model Machine Number
LTW20Z-1, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i LTW20Z1 5000620842, 5000620375, 5200004205, 5200004096, 5200023191, 5200024872
LTW6K Light Tower, Standard T4 LTW6K 5000620372, 5000620840, 5200004094, 5200024870
LTW8K Light Tower, Standard T4 LTW8K 5000620374, 5000620841, 5200004204, 5200004095, 5200023190, 5200024871
LTW20Z-3, LIGHT TOWER 60HZ, ISUZU TIER 4i LTW20Z3 5000620376, 5000620843, 5200003583, 5200004097, 5200023192
LTW20Z3-V S LIGHT TOWER, COLD WEATHER, T4i LTW20Z3-V S 5200018566, 5200018558, 5200018562, 5200023196, 5100015094, 5100022126
LTW20Z1-V S LIGHT TOWER, COLD WEATHER, T4i LTW20Z1-V S 5200018565, 5200018557, 5200018561, 5200024875, 5200023195, 5100015093, 5100022125
LTW6K-V S Light Tower, Cold Weather T4 LTW6K-V S 5200018563, 5200018555, 5200018559, 5200024873
LTW8K-V S Light Tower, Cold Weather T4 LTW8K-V S 5200018564, 5200018556, 5200023194, 5200018560, 5200024874, 5100015095, 5100022084
Light Tower LTW20Z3-V 5200012881, 5200012885, 5200012867, 5200022694
Light Tower LTW6K-V 5200012864, 5200012868, 5200012882
Light Tower LTW8K-V 5200012869, 5200012883, 5200012865
Light Tower LTW20Z1-V 5200012880, 5200012884, 5200012866

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.