The Wacker Neuson is a genuine OEM 3/4 Barb 3/4 MNPT Straight Fitting designed for the G-series portable generator line, including the G70, G100, G120, G150, G180, and G240 models across standard, cold weather, and custom skid-mounted configurations. As a direct factory replacement, this fitting is built to the exact dimensions and material specification of the original, ensuring a secure, leak-free connection in the generator's fluid routing circuit. Wacker Neuson genuine OEM parts are manufactured to match the original equipment precisely, so you can install with confidence and get your machine back to work without guesswork. Confirm your model number against the fitment list before ordering to ensure is the correct part for your specific unit.
Key Features
- Exact Thread and Barb Dimensions — Machined to the correct 3/4-inch barb and 3/4-inch male NPT thread spec, so the fitting seats and seals as intended without thread modification or adapter fittings.
- Genuine OEM Construction — Manufactured to Wacker Neuson's original material and dimensional standards, delivering the same corrosion resistance and pressure rating as the part it replaces.
- Broad G-Series Compatibility — Fits G70, G100, G120, G150, G180, and G240 portable generators across multiple production variants, including Tier 3, cold weather, skid-mounted, and custom configurations.
- Leak-Free Fluid Circuit Integrity — A correctly seated fitting maintains proper coolant or fuel line pressure; a cracked or stripped fitting can cause fluid loss, overheating, and unplanned generator shutdown on the job.
- Straight Configuration for Direct Line Routing — The straight-body design supports clean, low-stress hose runs in the generator's fluid system, reducing the risk of hose kinking or connection fatigue over time.
A barbed NPT fitting serves as the interface point between a rigid threaded port on the generator's engine or fluid system and a flexible hose line. The male NPT end threads into the engine block, coolant manifold, or fuel system port and creates a pressure-tight seal, while the barbed end grips the inside diameter of the hose to prevent pull-off under pressure or vibration. When this fitting cracks, strips, or begins to weep fluid, the generator's cooling or fuel delivery circuit is compromised, which can lead to overheating, loss of prime, or unscheduled shutdowns. Replacing it promptly with the correct OEM part restores the integrity of the fluid circuit and keeps the generator running at rated output.
Part Details
| Part Number | 5000179222 |
|---|---|
| Old Part Number | 0179222 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | 3/4 Barb 3/4 MNPT Straight Fitting |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| G100-GENERATOR, SKID, CUSTOM, DEERE T3 | G100 | 5000620651, 5200001319, 5200006900, 5000620312, 5000620313, 5000620314, 5200008348, 5000620649, 5200008347, 5200008345, 5000620650, 5100025816, 5100026957, 5100026958, 5100026959, 5100029211 |
| G120-GENERATOR, SKID, CUSTOM, DEERE T3 | G120 | 5000620654, 5200001320, 5000620652, 5200006901, 5200014467, 5200014468, 5000620311, 5200014466, 5000620309, 5000620310, 5200008353, 5200008351, 5200008349, 5000620653, 5100025818, 5100025840 |
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5200001321, 5000620306, 5000620655, 5000620307, 5000620308, 5000620656, 5100026980, 5100026981, 5100026982, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5000620303, 5000620658, 5000620304, 5000620305, 5200014470, 5200014469, 5000620659, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5200006904, 5000620300, 5000620661, 5000620301, 5000620302, 5200001323, 5000620662, 5100025834 |
| Mobile Generator | G70 | 5200008344 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.