The Wacker Neuson Carburetor Throttle Shaft Kit Complete is a genuine OEM component designed for the BS50-2, BS60-2, BS70-2, and BS65-V series vibratory rammers, including oil-injected and variable-speed variants. Sourced directly from Wacker Neuson, this kit delivers the exact engineering tolerances the original carburetor assembly requires — no guesswork on fit or function. Compatibility extends across a wide range of BS-series rammer configurations, covering standard two-cycle, oil-injected, and high-altitude models with shoe widths from 165 mm to 330 mm. If your throttle shaft is worn, sticking, or causing erratic engine response, this is the correct OEM replacement to restore full throttle control.
Key Features
- Genuine OEM Throttle Shaft Tolerances — Machined to Wacker Neuson's original carburetor shaft specifications, ensuring smooth throttle travel and consistent fuel metering that an out-of-spec shaft cannot deliver.
- Complete Kit — Everything Included — Supplied as a complete throttle shaft assembly, so all interfacing components install together for a clean, one-step carburetor repair.
- Broad BS-Series Rammer Compatibility — Fits BS50-2, BS50-2i, BS60-2, BS60-2i, BS70-2, BS70-2i, BS65-V, and MS52/MS62 series rammers across standard, oil-injected, EU, and high-altitude configurations.
- Restores Responsive Throttle Control — A worn or binding throttle shaft causes rough idle, uneven compaction force, and difficult speed control; this kit brings throttle response back to original operating feel.
- Fuel System Integrity — Correct shaft fit prevents unmetered air from entering the carburetor bore, which can lean out the fuel mixture and lead to engine damage under load — making accurate fitment critical for safe, efficient operation.
The throttle shaft is the pivot point inside the carburetor that controls how much air and fuel mixture enters the engine in response to operator input. As the shaft rotates, it opens or closes the throttle plate, directly governing engine speed and compaction output. When the shaft wears, develops play, or seizes, the result is poor throttle response, inconsistent engine speed, increased fuel consumption, and — in severe cases — an engine that cannot be properly controlled during compaction work.
Part Details
| Part Number | 5000179954 |
|---|---|
| Old Part Number | 0179954 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Throttle Shaft Kit Complete |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000009473, 5000620026, 5000620611 |
| 280mm/11in Shoe, Oil-injected Rammer | BS70-2i | 5000009401, 5000009341 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS50-2i EU | 5000009414, 5000009412, 5000009416 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620025, 5000620048, 5000620609, 5000620610, 5000620733 |
| 280mm/11in Shoe, Oil-injected High Alt. Rammer | BS60-2i | 5000009393, 5000620613, 5000620614, 5000009339 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
