The Wacker Neuson One Way Valve is a genuine OEM component designed for the BS50-2, BS50-2i, BS60-2, BS60-2i, BS70-2, BS70-2i, BS50-4s, BS60-4s, BS65-V, and MS-series vibratory rammers. Sourced directly from Wacker Neuson, part is manufactured to the same specification as the original, ensuring a direct, like-for-like installation. This valve sees service across an extensive range of two-cycle, oil-injected, and four-stroke rammer models in both standard and high-altitude configurations. When your rammer's one way valve is worn or compromised, replacing it with the correct OEM part restores proper oil or fuel circuit function and protects downstream engine components.
Key Features
- Genuine OEM Construction — Manufactured by Wacker Neuson to original design tolerances, ensuring the valve seats, seals, and flow characteristics match what left the factory.
- Direct Drop-In Installation — Engineered to the exact port dimensions and connection interface of the original, so it installs without modification into any compatible rammer.
- Broad Rammer Series Compatibility — Fits BS50-2, BS50-2i, BS60-2, BS60-2i, BS70-2, BS70-2i, BS50-4s, BS60-4s, BS65-V, and MS-series models, covering two-cycle, oil-injected, and four-stroke variants.
- Protects One-Directional Flow Integrity — A correctly functioning one way valve prevents backflow in the lubrication or fuel circuit, keeping oil delivery consistent and the engine properly protected under load.
- Fuel and Lubrication System Safety — In oil-injected rammer models especially, a faulty one way valve can allow oil starvation or fuel system backpressure; using the correct OEM replacement maintains circuit integrity and reduces the risk of premature engine wear.
A one way valve — also called a check valve — allows fluid or air to travel in a single direction through a circuit while blocking reverse flow. In Wacker Neuson vibratory rammers, this valve plays a critical role in maintaining consistent oil delivery to the engine on oil-injected models, or controlling fuel and air circuit pressure on two-cycle and four-stroke variants. When the valve fails or loses its ability to seal properly, backflow can disrupt lubrication or fuel delivery, leading to erratic performance, hard starting, or accelerated engine wear. Replacing the 5000180019 with a genuine Wacker Neuson part restores the correct one-directional flow behavior the system depends on.
Part Details
| Part Number | 5000180019 |
|---|---|
| Old Part Number | 0180019 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | One Way Valve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5100014905, 5100016652, 5200000676 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5100016651 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2PLUS 11IN HA US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS50-2 11IN US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS60-2 11IN | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| BS50-2 10IN | BS50-2 10in | 5100058346 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
