The Wacker Neuson Stop Switch Harness 2 Cycle is a genuine OEM component designed for the BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, and BS70-2i series vibratory rammers. As a direct source part from Wacker Neuson, the carries the exact wire routing, connector configuration, and switch interface specifications that match original equipment. This harness covers an extensive range of models across standard, oil-injected, variable-speed, EU-spec, and high-altitude variants, making it the correct choice for operators running multiple rammer configurations in their fleet.
Key Features
- Genuine OEM Electrical Integrity — Sourced directly from Wacker Neuson, this harness meets the original connector and circuit specifications for 2-cycle rammer stop switch systems, ensuring correct signal continuity from switch to ignition.
- Plug-and-Play Connector Match — Wiring connectors, terminal count, and harness length match the original installation, allowing direct installation without splicing or adapting.
- Broad Series Coverage — A single part number serves BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, and BS70-2i rammers, including EU-spec, standard, oil-injected, variable-speed, and high-altitude variants.
- Dependable Engine Shutdown — A functioning stop switch harness ensures the engine cuts out immediately on command. A damaged or corroded harness can prevent the operator from shutting the machine down cleanly, creating hazardous runaway conditions.
- Critical Safety Circuit Component — The stop switch harness is a primary operator-control safety path. Replacing a worn or damaged harness restores the machine's ability to respond to emergency stop inputs as designed.
The stop switch harness carries the electrical signal from the operator-accessible stop switch to the ignition or kill circuit on a 2-cycle rammer engine. When the operator activates the stop switch, this harness is the pathway that cuts spark to the engine and brings the machine to a controlled halt. If the harness is frayed, corroded at its connectors, or has developed an open circuit, the stop switch may become unresponsive — meaning the engine will not shut down on command. Replacing the harness with a genuine OEM part like the 5000180926 restores full, dependable control over the machine's ignition kill function.
Part Details
| Part Number | 5000180926 |
|---|---|
| Old Part Number | 0180926 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Stop Switch Harness 2 Cycle |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5200003696 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5000009380, 5000009382 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5000009388, 5000009391 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5000009397, 5000009399 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Four-stroke Vibratory Rammer, 280mm/11in Show | BS60-4s EU | 5000620812 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
