Wacker Neuson 5000182050 Press In Bolt
Wacker Neuson

Wacker Neuson 5000182050 Press In Bolt

$1.71
(No reviews yet) Write a Review
SKU:
5000182050-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Press In Bolt is a genuine OEM Press In Bolt designed for the G25, G50, and G70 series skid-mounted and trailer-mounted mobile generators, including Cold Weather, Extended Run Tank, Custom, and switchable 600-volt configurations. As a direct OEM replacement sourced from Wacker Neuson, part is manufactured to the same specifications as the original hardware installed at the factory. This bolt services an extensive range of G-series generator variants, as well as select HI750 and HI900 indirect air heater models and MGT trailer assemblies. When you need a fastener that fits correctly the first time, the is the part to order.

Key Features

  • Genuine OEM Hardware Grade — Engineered to the same press-fit tolerances as the original, ensuring the bolt seats fully and holds secure under continuous generator vibration and load cycles.
  • Drop-In Press Fit Installation — Designed to press directly into its mating bore without threading, making installation straightforward and repeatable during routine maintenance or structural repair.
  • Broad G-Series Compatibility — Fits G25, G50, and G70 mobile generators across Standard, Cold Weather, Extended Run Tank, Custom, and Tier 4 Final configurations, as well as HI750 and HI900 indirect air heater units and MGT trailer assemblies.
  • Structural Integrity You Can Count On — A failed or missing press-in bolt can allow panels, brackets, or structural members to shift under load; replacing it promptly keeps the generator frame and enclosure components properly aligned and secured.
  • Verified Part Number — Order with confidence using Wacker Neuson part number 5000182050 to confirm you are receiving the exact fastener specified for your machine's configuration.

A press-in bolt is a press-fit fastener that is driven or pressed into a pre-machined bore rather than threaded into place, creating a secure, vibration-resistant connection between structural panels, brackets, or enclosure components. On mobile generators like the Wacker Neuson G-series, these fasteners are critical for keeping frame assemblies, access panels, and mounting structures firmly located during transport and operation. When a press-in bolt becomes loose, shears, or goes missing, the components it secures can shift or rattle, leading to accelerated wear on surrounding hardware and potential structural damage over time.

Part Details

Part Number5000182050
Old Part Number0182050
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionPress In Bolt

Compatibility & Fitment

Name Model Machine Number
Skid-mounted Mobile Generator, Custom G70 5000620352, 5000620350, 5000620351, 5000620647, 5000620711, 5000620646, 5200001318, 5200003220, 5200006879, 5200003975, 5200003973, 5200003974, 5200014464, 5200004151, 5200014463, 5200014465, 5200008344, 5200008342, 5200008343, 5200008339, 5200008719, 5200008340, 5100025262, 5100025838
Skid-mounted Mobile Generator G50 5000009467, 5000009366, 5000620001, 5200001062, 5200001063, 5200006878, 5200001317, 5200001060, 5200001061, 5200014322, 5200014319, 5200014320, 5200014323, 5200017829, 5200022589, 5100042434, 5200017830, 5100042430, 5100042435, 5000620710, 5100045494, 5000620964, 5000620965, 5000620966, 5100042431, 5100042433, 5100045085, 5100045493, 5100042432, 5100025812, 5100026954, 5100029210, 5100026955, 5100026956
G25 GENERATOR, EXTENDED RUN TANK, SKID G25 5000620709, 5000620706, 5100042510
HI750 DGM HEATER-INDIRECT HI750GM 5000620859, 5000620930
HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 HI750GMHD 5000620969
MGT1S Mobile Generator Trailer, Surge, Pintle Hitch MGT1S 5000009299
MGT2SD Trailer, Surge, Dual Axle, 3500LB Each MGT2SD 5000009303, 5200001325
HI900 Heater-DGM,Srg,-40 HI900DGM 5200014221, 5200014222, 5200014165, 5200014166
MGT1S Trailer, Surge, Pintle Hitch MGT 1S 5200001324

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.