The Wacker Neuson Gasket and O-Ring Set is a genuine OEM component designed for the RT82-SC2, RT56-SC2, RTLx-SC3, RTKx-SC3, RTL82-SC3, and RTx-SC2 series vibratory trench rollers. As a factory-sourced assembly, this set delivers the exact material grades and dimensional tolerances required to maintain proper sealing across the hydraulic and mechanical systems on these machines. It fits an extensive range of SC2 and SC3 generation trench rollers, including Compatec-equipped variants, making it a reliable choice whether you're servicing an older unit or a current-generation machine. Keep on hand as part of your routine maintenance inventory to avoid unexpected fluid loss or contamination between service intervals.
Key Features
- OEM-Grade Seal Materials — Manufactured to Wacker Neuson's specified elastomer and gasket material grades, ensuring correct compression set and chemical resistance for hydraulic fluid and fuel exposure.
- Drop-In Replacement Fit — Each gasket and O-ring in this set matches OEM cross-sections and durometer ratings exactly, seating into existing grooves and mating surfaces without rework or trimming.
- Broad SC2 and SC3 Series Coverage — Confirmed fitment across RT82-SC2, RT56-SC2, RTx-SC2, RTLx-SC3, RTKx-SC3, and RTL82-SC3 trench rollers, including EU-spec and Compatec-equipped configurations.
- Leak Prevention Where It Counts — A compromised gasket or O-ring on a vibratory trench roller allows hydraulic fluid or oil migration that can accelerate drum bearing wear and cause erratic compaction output; a fresh OEM set restores the integrity of those sealed interfaces.
- Complete Set Convenience — Supplied as a matched set so all sealing components in a service zone are replaced together, eliminating the guesswork of sourcing individual rings and gaskets across multiple part numbers.
Gaskets and O-rings form the primary pressure and fluid barriers between mating housings, hydraulic ports, and rotating assemblies throughout a vibratory trench roller. They prevent hydraulic oil, engine oil, and other fluids from migrating past joint faces and into areas where contamination causes rapid component wear. When these seals age, harden, or are disturbed during service, even small leaks can lead to pressure loss in the hydraulic drive circuit, reduced compaction force, and eventual damage to pumps and motors. Replacing the full Gasket and O-Ring Set at each major service interval is the most cost-effective way to maintain fluid system integrity and keep compaction performance consistent across the drum width.
Part Details
| Part Number | 5000182733 |
|---|---|
| Old Part Number | 0182733 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Gasket and O-Ring Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
