The Wacker Neuson 5000183357 Throttle Valve is a genuine OEM component designed for the BS50-2, BS50-2i, BS50-2plus, and BS62-2 series gasoline vibratory rammers. As a direct OEM part sourced through the Wacker Neuson parts network, the 5000183357 is built to the same specification as the original valve installed at the factory. Fitment spans an extensive range of BS50-2 and BS62-2 variants — including standard, integrated ignition (i), plus, and Sunbelt configurations — covering multiple production series across both domestic and international builds. When your rammer's throttle response feels sluggish, sticky, or unresponsive, replacing the throttle valve with the correct OEM part restores precise engine speed control and consistent compaction output.
Key Features
- Genuine OEM Throttle Geometry — Machined and calibrated to the exact flow and travel specifications of the original valve, ensuring the engine responds accurately to throttle input across the full RPM range.
- Drop-In Carburetor Fit — Engineered to seat and seal correctly within the BS50-2 and BS62-2 carburetor body with no reworking of the bore or linkage.
- Broad BS-Series Coverage — Confirmed fitment across BS50-2, BS50-2i, BS50-2plus, and BS62-2 rammer families, including 6-inch, 10-inch, 11-inch, and 16-inch shoe variants.
- Consistent Engine Speed Control — A functioning throttle valve holds the set engine speed under load; a worn or sticking valve causes RPM fluctuation, poor impact rate, and uneven soil compaction.
- Fuel System Integrity — Correct valve fit prevents unmetered air from entering the carburetor circuit, which can cause lean-running conditions, overheating, and accelerated engine wear.
The throttle valve sits inside the carburetor bore and regulates the volume of air-fuel mixture delivered to the engine based on operator throttle input. On a vibratory rammer like the BS50-2 series, stable engine speed is critical — the impact rate and compaction force are directly tied to how consistently the engine holds its set RPM under the rhythmic load of the jumping mechanism. When the throttle valve wears, warps, or sticks, the engine surges or bogs, impact energy becomes inconsistent, and compaction quality suffers. Replacing a damaged throttle valve with the correct OEM part — Wacker Neuson 5000183357 — restores accurate throttle control and predictable compaction performance.
Part Details
| Part Number | 5000183357 |
|---|---|
| Old Part Number | 0183357 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Throttle Valve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS 50-2 | BS 50-2 | 0009384, 0620609, 0620610, 0620733 |
| BS50-2 10in | BS50-2 10in | 5100058346 |
| BS50-2 11in US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 11in o. bsz | BS50-2 11in o. bsz | 5100068309 |
| BS50-2 | BS50-2 | 5000620025, 5000620048, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647, 5200000641, 5200000652, 5200000653, 5200000654, 5200000655, 5200000656, 5200000677, 5200000685, 5200000686 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2 EU | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| BS50-2i | BS50-2i | 5000009473, 5000620026, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5100014907, 5100016648, 5100016649, 5100016650, 5200000642, 5200000678, 5200000687, 5200003696, 5200011099, 5200025428 |
| BS 50-2i | BS 50-2i | 0009338, 0620611 |
| BS50-2i EU | BS50-2i EU | 5000009414, 5000009416 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
