The Wacker Neuson Lug Terminal 600 Mcm is a genuine OEM component designed for the G150, G180, G230, and G240 series mobile generators. As a direct OEM replacement, part is manufactured to the exact specifications Wacker Neuson requires for safe, reliable high-current electrical connections in these units. Fitment spans an extensive range of configurations including Standard, Cold Weather, Custom, Tier 3, Tier 4, and Tier 4 Final variants across all four generator families. When your terminal lug shows signs of corrosion, heat damage, or mechanical wear, replacing it with the correct OEM part keeps your generator's output connections performing as intended.
Key Features
- OEM-Spec Conductor Sizing — Rated at 600 Mcm, this terminal lug matches the exact conductor gauge and current-carrying capacity specified by Wacker Neuson for these generator models.
- Direct-Fit Connection — Engineered to terminate directly onto the generator's output cabling without modification, ensuring a secure mechanical and electrical bond at the lug point.
- Broad Generator Compatibility — Fits G150, G180, G230, and G240 mobile generators across Standard, Cold Weather, Custom, Tier 3, Tier 4, and Tier 4 Final configurations, including Transport Canada variants.
- High-Current Integrity — A properly seated 600 Mcm lug terminal maintains low-resistance contact at the output connection; a failed or corroded lug can cause voltage drop, overheating, and unsafe operating conditions.
- Electrical Safety Compliance — Correct termination hardware is critical in high-amperage generator circuits; using the OEM-specified lug helps maintain the integrity of the generator's electrical system and supports safe load delivery to connected equipment.
A terminal lug is the mechanical and electrical connection point where large-gauge power cables are secured to a generator's output studs or bus. In a high-capacity generator like the G150 through G240 series, the 600 Mcm rating indicates an extremely large conductor cross-section designed to carry substantial amperage safely. The lug crimps or bolts onto the cable end and provides a solid, low-resistance interface to the output terminal — if it corrodes, cracks, or loosens, resistance at the joint increases, generating heat that can damage surrounding wiring, trip protective devices, or create a hazardous fault condition on site.
Part Details
| Part Number | 5000183672 |
|---|---|
| Old Part Number | 0183672 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Lug Terminal 600 Mcm |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5200001321, 5200006902, 5000620656, 5000620306, 5000620655, 5200003160, 5000620889, 5000620307, 5200007860, 5000620308, 5000620887, 5000620888, 5200014784, 5200010135, 5200010136, 5200010137, 5200025554, 5100026980, 5100026981, 5100026982, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5200001322, 5200006903, 5000620303, 5000620658, 5000620659, 5200003161, 5000620886, 5000620884, 5200007861, 5000620304, 5000620885, 5000620305, 5200010140, 5200014470, 5200010138, 5200010139, 5200014471, 5100015615, 5200014469, 5200025555, 5100045089, 5100045575, 5100045576, 5100045590, 5100045591, 5100045592, 5100049844, 5100049845, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5200001323, 5200006904, 5000620662, 5000620300, 5000620661, 5200003162, 5000620301, 5000620302, 5200025556, 5100025834 |
| G230 Generator, Custom T4i | G230 | 5000620883, 5000620881, 5000620882, 5200007862, 5200010141, 5200010142, 5200010143, 5100015614, 5100045190, 5100045596, 5100045597, 5100049846, 5100049847 |
| G150 Generator,Hertz,T4 Final | G150 Generator,Hertz,T4 Final | 5100015616 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
