Wacker Neuson 5000201039 Centrifugal Clutch

When the engine is running but the machine won’t engage when the RPMs increase, the clutch is usually the culprit, but before simply replacing an entire clutch, a few things to check first. On belt-driven clutches, the simplest and cheapest check would be to look for a torn or loose belt. If the belt is loose, the clutch could freely spin and begin to burn up your belt. If the belt is turning from the clutch, the next likely culprit is the drive bearings themselves or even the bearing in the clutch. If you hear any high-pitched squealing once the machine has been running for a minute, you likely have a bearing issue in the drive or the clutch.

If all of this has been checked, the clutch may be where the issue lies. You can remove the clutch and see if the shoes or the springs are worn. This can cause no engagement from the clutch or premature engagement. For most of the clutches we offer, we do sell the shoes and springs by themselves. If the shoes or springs are worn, or you prefer a simpler bolt-on solution, the complete clutch will do the job.

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Questions? Contact our team at [email protected] or (954) 532-2142.